Search:

poddy UltraGauge EMPlus _ IMO is good kit and yes does display boost pressure (absolute and gauged) from MAP sensor (cold side cooler) via ECU. Example of one page that I use. Price has dropped...

Pls excuse the snip.

That is what the "blocking diode" is for, to prevent reverse current flow when the sun isn't shining.

Also, a PWM Reg will reduce the effective rating of the panel by about...

Dhuck I agree with nipagu7 the best option upfront is to get a ECU remap which if done well will turn the EGR fuction off and technically it is not then required to physically use the EGR blanking...

This is the thread I was thinking of. It has lots of information. I used the Jaycar module and it works fine - every time!
...

Well after a bit of a drama finding somebody reliable, my Y61 now handles like a dream ... offset bearings and shims played with and I can tell you she is a joy to drive now. No pulling, no wobble,...

Yeah thanks I just re read my post was in a time of panic! I have a 2011 wagon 3l. I did end up undoing the 4 bolts which fasten the bar to the trailing arms and undoing one on the exhaust side up...

Hey Lads,

Long time lurker and reader, but i think this may be one of my first times posting.

This thread is discussing the specifics of replacing the A/C compressors in the ZD's and some of...

Do you know if the new radiator has the same number of 'Fins per inch' as the factory original? I replaced a factory radiator in a Merc G Wagen with an aftermarket unit and they reduced the FPI. The...

Forgot to mention, if possible bring the earth wire for the trailer , caravan, back to the car battery.
99% of electric brake problems are earth related. Running that extra wire will save you from...

The bushes flog out and the shockie thingo loses its tension. The genuine bearing in those are double row and a stupid width too, you can't buy the exact same bearing. The aftermarket tensioners use...

Do you need to replace the pulley or is it just the bearing gone. A new bearing is around $20 to buy. The number is (NTN) 87503. Press the old one out with a vice & large socket & press the new one...

Good evening Patrollers,

Just thought I would share my recent experiences with my 2011 series 7 GU CRD patrol - and the crap experience from the local Nissan Dealer.

I bought her only in...

A Vacuum controlled turbo on the ZD30 is the cause of cracked heads and blown pistons? Why did I not pick up on this earlier?

good insurance and cheap enough as well, remove the engine cover and swap out all that old hose
do one hose at a time so you know what goes where

Yeah Sorry pollenface, it's been a busy week or so for me.

If you haven't already played around again . . . . . here's my reply.

You shouldn't need to buy any New Shims, it's the removal of One...