Just on that, I'm pretty sure one of the turbo studs on mine took all the thread with it and I ended up just drilling it through and replacing with a bolt. They were stuck tight.
Just on that, I'm pretty sure one of the turbo studs on mine took all the thread with it and I ended up just drilling it through and replacing with a bolt. They were stuck tight.
Well, turbo is probably the easier of all the possibilities to fix anyway.
Probably less headache to deal with the 4 bolts/studs at the turbo. I'd avoid removing the manifold unless you have too,...
Definitely not burning oil somewhere else mate? I would have thought the oil would collect quite significantly in the intercooler ect if it was using a noticeable amount of oil. As in, I would expect...
Cuppa has covered most things except that the isolator has an on/off delay.. Ie less than 12.5v for >5seconds will disconnect. It shouldn't connect/disconnect immediately so t looks like it's...
I got similar from quikazz. Love it but I do wonder what temp the hub actually kicks in at.. Mine seems to come in at about 85 but I think my stat is a 90.
I wonder what the balance there should...
I've got a tig and am always on the look out for a cheap/good mig. The tig is very handy but a bit tricky to get used too and significantly slower than a mig. I would save your pennies and stick with...
Nice setup!
If I still had all the money I've spent fixing the wrong thing I'd have paid off my house by now.
Took the drawers out. Served me well but time for a change and an update now I have the camper as primary means of storage(and weight). Not sure what the plan is, but probably just tubs.
81486
...
It's got a 2in lift in it and at full drop of the front axel the factory line was guitar string tight. It's not too often you get that condition driving but I probably should have changed it long ago...
This little fella..
81413
$15 from SCA. Bled all my brakes myself with no "up, down, up, down, up, wait... Down" needed. Game changer for me.
Action shot;
81414
Front RDA slotted and dimpled rotors and yellowstuff pads, thanks Cuppa (I think it was you) for your recommendation. Also put a new extended main braided brake line on there too.
They say no...
Mate I have searched for a nut and bolt kit with a good variety of useful sizes on a few occasions and came up short. Just got a couple of smaller kits around the m6/m8 sizes.
Then I see this, 20...
Run it past the forum here before you lock in your hard earned mate. UFI will build you a brand new pump for what ever horsepower you're after. It'll need a bit more fuel if you wanna run 20psi. Give...
I had a dts kit on mine I reckon. Was on there when I got it. Seemed like a bit of a waste of money really. I was running it at 15 psi and I reckon that was past what it was good for.. Bit bigger UFI...