There are several options around with the spring loaded key that work way better than the factory unit. I got mine on eBay and had a local locksmith cut the keys. Didn't need the NATS programming...
There are several options around with the spring loaded key that work way better than the factory unit. I got mine on eBay and had a local locksmith cut the keys. Didn't need the NATS programming...
I see in your pic that you’re also missing the temperature switch that lights up the warning light on the dash when fluid gets to 140°C.
87298
I have my TK419 in an ideal location that has good access to satellites but, with respect, I don't think it's the kind of thing that one should be broadcasting publicly. Kind of defeats the purpose..
I had to do that on the side of the road when my 18 year old heater core started leaking in the cabin after some bad corrugated roads. I left it bridged for over a year until I found the enthusiasm...
Yes, I use the $15 for 365 days Aldi SIM. It only debits the SIM when you use the SMS option to get notifications.
You can text different commands to it like asking where it is and it replies with a...
Sorry to hear about that mate. I have a $100 Eelink GPS tracker (TK419) on mine so I can see on my phone where it is or where it went. I'll even get a notification if it vibrates or shifts 200m or...
Just put it on my shopping list to order today. That will be 3 different nutsert tools in the drawer. At 78 I'm starting to have trouble pushing the arms together even on the long armed tool with 6mm...
Mine’s still a work in progress so I don’t have the thermocouple in the hot side to compare in/out air temps.
I won’t be measuring the water temps at all.
I only have 3 and a bit litres coolant...
Are you measuring intake air temps with the W2A? I'm currently converting mine to W2A with Aeroflow gear (IC, pump & heat exchanger) and I'm putting exposed tip thermocouples before & after the IC to...
I bought a $39 air fryer from Kmart on sale down from $59. 1300W and runs off the 2000W inverter in the back of the Patrol. Pulls 125 amps and works really well.
As mentioned, no need to degas but full dash removal. It looks impressive but it’s not that hard. I did mine a few years ago by myself when I was only 75 :)
87006
It's because the manifold top is made from a 100 x 3mm tube and it amplified the clacking noise level so I wrapped it to make it a bit quieter. It's not intended to stop heat soak.
Coming from a...
I run a Fuel Manager 30 micron as pre-filter/water separator with audible alarm but I probably wouldn't run it without the Carter 4600 lift pump.
86996
Yes, I'm using an OEX adjustable timer on my TB45E to TD42T conversion. It's been working faultlessly since 2015. I set it to 6 seconds glow then it does 6 times on/off for a second each time as the...
We came back last week after 5 days there. We had a cabin in Happy Valley because we're septuagenarians now and too old to camp.
We live just north of Brisbane so only a couple hours drive up, get...