Search:

Not to be confused with actual "water injection" which is where water is atomised into the combustion chamber.

Have a look in Bigrig's thread, pretty sure he's used mesh in his grill as well. Couldn't tell you where in that mammoth thread it is though and can't remember if he did a write up about it...

ok i think i can live with that, my missus talks too much any way haha

Possible with a LS1 conversion :).

Hey mate we like people to head to the introduction section first mate and say g'day.

Just like walking I to any room mate, say g'day and people will happily welcome you and give every assistance...

Ive seen people set up an airline from a locker compressor to their dissy. They put a restricter so it only runs a constant 2 or 3 PSI which gives the dissy a positive pressure and stops water...

Idea , get a compressor from a set of red airhorns and set in down via a needle valve of some description .
drill small hole in side of dizzy and silicon hose in it. Just hit the switch just before...

1/4 chop is quite easy. If you buy the pre cut ones from eBay then follow there instructions..
If doing it yourself the cut where ever.. leave about 10mm to form a lip and fold it under before...

Mate im running pentronix in mine and its loves water its a TB42. It had points before and what a hassle.

remember plenty of pics....

Its a tb42, it doesn't do high rpm... :p

Kallen Westbrook
Owner of
Westy's Accessories

Mate if you could head over to the introduction section and say g'day that would be good..

You may find people are more willing to help with your problem.

http://www.nissanpatrol.com.au/forums/images/imported/2013/05/32.jpgNearly finished. Just need to finish up the trim on the door, adjust the latch and put some wire straps in.



I tapped that...