Search:

Another good day in the garage. Finished off the tank, mounted the pump and painted the tank ready for a coat of epoxy bitumen then thermal insulation. Ordered some custom a/c fittings as the...

I am running 33r10.5r15 3.9 diff ratio Its been so long since it was on the freeway I cant recall the rpm, but am sure its around the 1950 - 2000rpm

OK, interchiller in my hot hands, looking to install this roster break. Plus a new replacement condenser to replace the 23 YO one, and also a power upgrade pulley for the s/c to compensate for the...

New manifold went on today, holes didn't line up again, just like the first one, however the belt alignment is now perfect, so will run the 6 rib belt just to confirm then swap out to the 8 rib...

That is exactly what I did in the GQ mate. Even some of my old wiring from years ago scared the shit out of me. It was way way easier to just write it off and start from scratch. I have full...

OK, fitted the under bonnet self adhesive felt and its come up a treat. Tough and difficult to cut and trim, but with the right applicator roller, it roles out without a fold or stretch mark. Rated...

Bonnet scoop turned out well. going to line the underside tomorrow, waiting for all the sikaflex to dry. Frames are 25x25x3 angle.7933379334

So a mixed day. BD finally agreed to replace the PS pump that last 3klm before shitting itself. Once I got it out of the car and apart, found the front bearing was knackered and the pump full of...

Test of success will be on dark wet roads. I contacted the guy who puts them together and they use very small wattage LED's and he won't quote wattage as he says it just pushes the competition to...

OK, its alive. Put on the rubber suits and have a quick taste. Its missing the oil filler nozzle at the front, and the new aircleaner, but it fired up on the 3rd crank. Alignment of the 8 rib...

OK, PS hoses measured for Pirtek tomorrow morning, into airbox design pre cardboard mock-up, and decided to upgrade the 100amp alternator at the same time, 180amp at idle, should be enough! Want the...

I contacted the VASS engineer again today and he wants a 200 cell/inch unit installed, not 100. I have asked the question of the suppliers regards pressure drop and cell density, but no answer as...

53147
53148
53149

mine has a DP chip, boost is max at 20 psi I tow and have no problems whats so ever, it flys if a patrol can do that lol
fuel is 15 towing and 12 around town