Search:

Tough call...
Being woken at 5:30 with the sun belting through the curtains.
-or-
Sun coming up at a reasonable time, plus a couple of hours to do stuff after work.
I think I'll take option 2!

If it's the ones I'm thinking of there is a screw that holds them on which is behind the Nissan logo... You need to peel the sticker off to access the screw/bolt.

I'm a Holden man through and through but have lost interest in the racing as they aren't representative of the road cars.
I'm sure the Holden teams would love to run an engine based on the Gen4,...

I've been thinking one of these might be good to protect that area:...

I've had the same problem with mine. I pulled the fascia off so I could see the mechanism and cables etc, then lubed all cables & everything that moves; then I cycled through every directional mode...

I've returned from a relaxing overseas trip and finally got around to replacing the other 3 injector seals.
It is possible to do them without the removal of the intake manifold. Just remove all the...

Two tips:

-You actually should be hitting the part which the stud goes through, in your case you should hit the drag link & panhard rod. This pic isn't of a steering damper but should give you...

I've been working with new cars for the last 15 years and I don't think running in as per the old school procedures is necessary. I'm a firm believer in giving a new engine plenty of stick, but under...

It's not state specific but here's the RACQ info:

http://www.racq.com.au/motoring/cars/car_advice/car_fact_sheets/headlights

There's a lot of reasons - the reflectors aren't designed correctly...

I put a 3" on mine, definitely noticeable power increase.
I put a chip in about a week later so can't really comment on fuel economy difference.

I'm thinking an inverter would be really handy, I would like to use it to charge things like handhelds, iPod dock (rechargeable), recharge batteries for ryobi stuff (rattle gun, drill, camp light). ...

Hi all,
Always the way - I saw these at SCA today after I'd paid a lot more than $40!!!!
http://i160.photobucket.com/albums/t164/gordy308/0a0d994d.jpg

I would be getting the wiring corrected and add relays to the circuit while you're at it.
Plenty of people have fitted HID's but it is illegal. Only vehicles which were factory fitted with HID's...

Not ideal at all. Different size front to rear or side to side is bad news.
Side to side will cause issues with your LSD.
Front to rear will cause transfer case wind-up. Technically you should...

Pretty common for a sensor like this to fail intermittantly, the light might stay on for a certain amount of ignition cycles after that fault.
There's no way of telling how often it will play up...