Search:

I've not used their kit however I did get a gas strut from a caravan place and it works well.

To slow down the spool up you need to open the needle valve up.

Hi everyone, I just finished doing an engine mount on my own and since there wasn't a whole lot of info on it i figured I'd post a guide on how to do it for beginners. Credit to Mudski as I used his...

Put one back on recently when we did roofys motor. Was pretty easy just two bolts from memory access from underneath is easiest.

Shellite is more expensive than petrol, but won't stink as much.
Graham

Just to add. Dont use the stainless steel filters. They dont filter as good as the original type.

Sent from my GT-N7105T using Tapatalk

Use petrol to clean it. Petrol is the only thing that will clean the oil right out. Then clean in hot soapy water, then let it dry and re use. The filter will smell of petrol but wont have the fumes...

The left looks like there shoulds be something there a few spare holes
here and there. Sorry cant bend down to get a picture
RRHS is same as above

There is a small flimsy inner guard about 250mm
long and costs about $28 from Mr Nissan

No inner guards on mine only a cover on the right hand side for the fuel filler hoses

Yep - seen that before as well. I have used many, many different seat belts in different cars over a lot of years and I never had to use "cleaning wire" or "cleaning tape" or any other shyte. The...

http://www.nissanpatrol.com.au/forums/images/imported/2016/03/192.jpg

http://www.nissanpatrol.com.au/forums/images/imported/2016/03/193.jpg
...

Fully extend the belt.
Inspect the sides of the belt for fraying and trim off any frayed fibres
Replace the belt if sides are noticeably frayed over several inches or more than 5% across or there...

Bob sand papered the slot up on the B pillar

I think Bob had the same trouble cant remember what he did thinking it had to do with soap