Search:

Yeah I am concerned about dust entering the inlet manifold, so I will supply a glued on gasket with the "shim" to seal between the inlet manifold and the "shim", best to be on the safe side as dust...

Yeah, 316L or 304 stainless would be the go, I have access to plenty 1mm thick.

Yep, I agree. Being a tuning specialist for over 10 years back in the 80's I have seen many cars fitted with EGR disconnected. Even to this day the EGR is being disabled. Years ago EGR valves were an...

Although I've never had a car with diesel/gas, or taken a converted car for a drive, as a mechanic (and former automotive LPG fitter) diesel gas makes a lot of sense. By adding a small (about 20 or...

ZD30 Prior series 4
there should be 4 wires at your MAF they'll be Red, White, Black and White terminal 1,2,3 and 4 respectively,
With the car idling, warmed up to normal operating temp, vehicle...

This pic shows the position of the Mass Air Flow sensor (on my ZD30) on the top of the air filter housing. Shown here with the wiring cover removed....

I doubt it if a dealer would do this mod but a good off road workshop Should be able to.

Yes its a commonly done mod, in fact there is a spread on it here in the DIY section under: Nissan Patrol...

Do the dealers and workshops around do this modification?
And is it something that is commonly done?

ROFL.. Hiya G Unit

Actually the biggest plus in my opinion would be the big reduction in soot and particulates getting shoved back thru the engine.

From the many discussions on the 'net about...

What is EGR (Exhaust Gas Recirculation) and why should I block it?

Wiki link for in-depth explanation.

TLDR;
*EGR works by recirculating a portion of an engine's exhaust gas back to the...