Search:

No worries mate. Happy to help. I just need to see what i have. Im sure i have one or two somewhere in the garage. But its a mess at the moment with my patrol in pieces. Ill look tomorrow mate. Then...

Mate i reckon i will have a good second hand maf somewhere. If not, pm Scott, Covo, i sent him one for a test he might still have. But i reckon ill have one...

Sent from my SM-P600 using Tapatalk

@ MH its a 3lt Turbo diesel for crying out loud, how fast do you expect to go.
They are highly strung from the factory, might be chasing your tail,
you might be better of slotting a LS1 in it, lol

Dont believe the hype of a sellers power percentage gains. Even with reputable performance chip sellers. Take it with a grain of salt.

Sent from my SM-P600 using Tapatalk

The pic rock trol posted, go by this for the standard setup. Its just the dawes in that pic with no needle valve, so it basically Tees in the line from the controlerto turbo.
When you put a needle...

Dont bother about the DS actuator yet mate. I read on the other forum a few with it and reckon it was shite. Dunno how true that is though...When your running higher boost levels you need the needle...

4.2 mate. I wouldnt bother with anything else personally for the conversion.

Sent from my SM-P600 using Tapatalk

Didn't last long..... Mate it isn't a big ask, took me a couple of weeks I think. Be a contributor, not a leecher.....

I'll have a Tps soon mate from my zd once i get around to removing it.

If you don't have any luck here, PM yendor.

Hi MH some members here have drilled a small hole
in the TPS by hand and given it a squirt with WD40/ CRC
and its worked, only need a small hole, see how you go.

I would check your MAF, its pretty hard to go into limp mode with the HPD MAF housing.

And all this from a guy who thought he brought a Lemon lol
The Mulletmobile is alive and well

I wouldnt suggest using the rear loop to recover it will fail same as the hook on the front.
I was talking to my Mechanic 335 RwKW Patrol about upgrading my turbo pipes to 60mm.
I think they are...

I havent fitted my 76mm intake yet, Mark has nearly done his.
Im waiting now on a 60 degree bend as I dont think a 45 will work.
I'll also be taking your Maf to a mate on Tues, to see if he can...