Search:

I'm 99.5% sure there is no owners manual for the GQ, even if there was it would probable be a crap scan.

I'll check all my resources again tonight as I haven't checked for a while, but don't like...

Because I am not keen on switching the Lock up in and out under load. The Box and the TC will handle the heavy load when it is "locked" it is just the switching that makes me uncomfortable but used...

As soon as I cleared the town 80 zone I would lock it up and go from there.
Along the flat or shallow downhill was all in OD with the TC locked.
Slight uphill I would drop the OD out and stay...

hi
what we use as work is a short piece of copper pipe bent to 90 degrees with the end almost closed attached to the hose we remove the fan speed resister that bo that goes into the side with a...

Solaris is the brand name, aka Dynamat, they are on Ebay. It's about 3mm thick, heavy duty aluminum foil over a bitumen/asphalt like material which goes down on the metal. I've been using a very...

Hi ripper,

There should only be one wire going from your TCU to the converter solenoid in the transmission. From memory I think its terminal 21 on the TCU, but not 100% sure as GQ models did...

The most common cause of the TC lockup dropping in and out is a worn out TC.
95% a reco TC fixes it (if the box is still in good condition)

tappn it

Top write up old mate!!

Great write up ripper......did you get a refund on the box you bought off ebay????

B = Black
BR = Brown
W = White
OR = Orange
R = Red
P = Pink
G = Green
PU = Purple
L = Blue
GY = Grey

so yesterday i installed my pertronix 1762LS (lobe sensing) electronic ignition system. i reckon this job should take about 10 minutes but the instructions were not very good, and seeing as ive never...

Well time for an update on my camper fit out.
Little has actually changed since I last posted, but I have been doing some collecting & soon will have to start fitting the stuff I've collected....

Day 3 - The Cleanup Begins

Main objective for today was 2 emery clean off old gaskets, wet n dry any surfaces that needed doing and to wash all parts.


Text 2 follow

7977 7978 7979 7980 ...

Forgot to mention...

On the outside of the nutsert there are grooves which are suppose to bite into the metal and to stop it from spinning.

Sometimes the nutsert can spin when you are trying...

http://www.nissanpatrol.com.au/forums/images/imported/2011/04/1.jpgA nutsert works on the same principal as a pop rivet.


...