Search:

the main reason your seeing them so much is all the major construction projects require them to be fitted to any vehicle before its inducted to come onto site

the point would be that the bigger heavier gears of a tb/td box would take more energy to get spinning, a similar effect to if you were to double the weight of the flywheel

nah trap door in rear cargo area

would have loved to but usually spend aus day on eildon with my boat

doesnt matter what welding process you use you should be grinding off any paint,gal,rust or scale first regardless. and a wire brush will not remove gal or scale just polishes it

without clean...

my point is that even down to 1.6mm steel you will be able to stick weld it if you get a bit of practice and use decent rods that freeze up fast, not just cheap nasty gp rods from bunnings

dom in all honesty your 130 amp mig is going to struggle on anything over about 3mm,if your looking at a good ac/dc tig machine then put the effort into learning that and learn to stick weld properly...

you do know that when going from gas to gasless and vise versa that you need to switch the polarity on the welder

cant say ive ever seen that brand before if i was going to bet id reckon there probly a chinese copy of a good rod

all of those products are short term band aids , if your getting exhaust into the cooling system then either the gasket has failed or the head is cracked. a bit of goop in the radiator is never going...

well free tip no1, go grab a box of wia or esab 16tc rods 7016, they run alot nicer than cheap gp rods which are probly a 6013 and you can clearly see the slag sitting on top of the weld as your...

tbh mate with the power level of this mig or more the lack there of you would be better off putting the time and effort into becoming better at stick welding and save the gas for your tig efforts if...

biggest problem you will have is you need different gas mixes for different metals and processes

is argon/co2 mix to mig steel, straight argon to mig aluminium or tig steel and from memory its an...

i thought the gq turning circle was bad until i got my 79dc

12-13 ish under wot would be a good starting to try