22nd October 2013, 07:33 PM
I did use that stuff, not sure how effective it was and was a bit disappointed that it was still noisy. I didn't do the top half of the rear firewall or front firewall (Ute) just the floor and up to...
21st October 2013, 11:57 PM
3m trim paint you can buy it from any paint supplier to the car industry there will be one or more close to a few panel shops
21st October 2013, 09:32 PM
Or go back and ask for
the M3 vinyl mid grey
21st October 2013, 09:11 PM
Go to autobarn if they don't have it they can mix it and they can mix into spray cans also I think a standard can was like 30$ last time I needed some.. Cheaper if they don't need to mix it also
17th October 2013, 04:07 PM
I would've thought an exhaust specialist should be able to weld that with a mig for not too much, (my local bloke charges $65 an hour). Even a good solid weld on one side should be pretty strong.
15th October 2013, 07:50 PM
My 3rd entry.
'Birdfence'
Zebra finches are a reliable indicator of water nearby. In this case a dripping tap close to the cyclone fence at a Barkly Highway rest area.
...
13th October 2013, 06:39 PM
Second entry. Old Police Station and Gaol of an old town, between Dongara and Geraldton.
9th October 2013, 07:54 PM
2nd entry.
Shire boundary fence
http://www.nissanpatrol.com.au/forums/images/imported/2013/10/41.jpg
5th October 2013, 09:27 PM
Pretty neat I thought when I took the pics last year.
4th September 2013, 07:20 PM
I leave the outlet hose off the filter housing to prime, and stick a cup under the fitting to catch the fuel and air bubbles that will come out , once its ok then I fit the hose back on and a half...
4th September 2013, 06:31 PM
yes but the fuel filter is a very similar element ;)
mate unbolt the whole housing from the bracket, invert it, bolt it back to the bracket upside down with the fuel filter now in the air and...
28th August 2013, 10:23 PM
http://www.nissanpatrol.com.au/forums/images/imported/2013/08/208.jpg
28th August 2013, 10:00 PM
You need to draws up a pic with photoshop or paint and number and label the pins and make a sticky Darren. I reckon many come unstuck when they see the amount of pins on the back of ARB switches.
28th August 2013, 09:27 PM
Blue goes to pin 2
White goes to pin 3
Black goes to pin 7 & 8
Source a dash light circuit from you ashtray light or cig light or dash light and the positive side of that goes to pin 6
28th August 2013, 09:05 PM
Easy as mate
2 switches 3 so positive to pin 2
Pin 3 is positive to 40amp relay to power the light air Red wire
6 is the dash light illumination
7 & 8 are both earth.
The ARB switch has 2...