Search:

Nice one. The 11xp has heaps of room.

It was a very tight fit though in the standard Nissan winch bar but they managed to fit the 9500-Q with a few mm to spare.

Nice. This winch was my second choice.

I have the RUNVA EWX9500-Q Competition winch with Dyneema rope. It costs $699 and I paid an extra $150 to get it fitted by Pro 4x4 here in Adelaide. They are a good alternative to the WARN if price...

I have been recommended the runwa winch too by many people. If you do fit them please follow up with the price and details mate.

X 2 on the runva 11xp

Runva 11xp fit between the chassis rails.

all the others will but you may have to turn the end case depending on brand, not a big job. a few guys of late have been going the runva winch which seems very good value.

X 2 with what Hodge says I marked the dawes with a texta and wrote down what I did
once the boost was right I then set about tuning the spool up rate I believe I have it right if not
pretty damn...

Good to hear things are going well with the Patrol mate. Dawes and needle need a sweet spot, and once you find it, set it and forget it.

Don't worry. The 3inch will be absolutely fine. 1/4inch difference is sweet f.a. if i owned a crd I would be going 3inch personally.

I have just fitted EGR and Dawes set up and gauges to my 08 CRD. Previously fitted catch can and second filter/water trap. Scan gauge will arrive next week to clear the check light:icon_bonk: The...

Few things mate. Allowed me to set max PSI, hence eliminating potential limp mode. And most importantly gave me a smooth, even, linear boost curve, instead of the factory boost doing the "yoyo" all...

Hey Hybrid.
I was a bit sceptical at first my self with fitting all of that to my CRD. And once I had it all fitted, I was kicking my self for not doing it earlier. Especially the manual boost...

all on board with the 2.75 exhaust and the main reason for these upgrades on the crd is power mine is quite a credible power house now