Search:

You can remove the tailshaft and end for end it so the narrow section of the shaft is over the crossmember. Gives you a bit more clearance.

I've had a 2" lift fitted to my Patrol for years now, and it has always handled well, and worn tyres evenly, so when I replaced my coils with some longer ones (couple of inches longer), I was a bit...

Steve, if the black plastic disk is something like this, then it is the PCV valve, which controls the flow of gases from the crankcase of the motor. If you pull it off you will find that there is a...

Welcome. Sounds like an excellent trip you have planned. Don't forget to take plenty of pics to share with us when you get back home again.

From one newby on the forum to another, welcome along. Sounds like you have a good solid 4by to get out and about in. Look forward to some pics out and about.

I had 2" lifted Dobinson coils in my Patrol for many years, and it wasn't until I fitted a winch to the front that the coils began to sag a little. I fitted 30mm coil spacers for a while however...