Search:

This looks like a reasonable possibility.

https://www.supercheapauto.com.au/p/sca-sca-dashmat-grey---nissan-patrol-01-1997---12-2016/3712.html#q=dash%20mat%20nissan%20patrol&lang=en_AU

Pretty sure you have much the same model as me. (suspect yours is a coil rear, whereas mine is a leaf rear)

I bought our dash mat just after I bought the vehicle in March 2011 & am pretty sure it...

For us Vic Mexicans:

http://www.nissanpatrol.com.au/forums/images/imported/2021/06/109.jpg
...

It screws in from the back. Anything can be used. 4mm Alluminium, tin. 5mm perspex. Wood. Good place to then mount switches if you want

Hopefully this helps

83790

There is a very handy bung in the fire wall where the Left Hand Drive model steering column would be. Its Big and will take a heap of wires if you want to. ;)

The Trigger for the camera at the...

Anywhere. Just go to a tool shop and get a deep 6 point socket. And just cut a slot in it with the grinder.

Sometimes you can get lucky and the screw that holds the wire onto the injector can be...

I just replaced the rubbers and a new r/c gasket and didn't bother with reshaping the cover. Hasn't leaked.

Will they fit a Suzuki Jimny , if so can I take LHS only and light brackets off bar. Also want to use as a rock slider do you think they would be suitable in standard form ?? . . Please call me...

Righto. Pretty simple. Remove the hub > Undo the four bolts holding the two halves together > Lay the hub flat, mountnig flange up and let it sit for a while to let the oil move to the lower half of...

Are you adding more oil to make the hub lock up earlier, or just changing the oil?

For coolant or turbo? My work imports the Breeze range of clamps. We sell probably 10 different sorts of clamps. Depending on what it’s for, the type of clamp you choose, and what it’s made from,...

Extremely knowledgeable team, haven’t needed their service for some 20 odd years but do remember top assistance if that was Garry still back then?
I’m sure he’ll honestly agree though that a real...

The tip of that probe mate will barely be inside the s/tat housing, if at all. I have the same probe and they are quite short.

Gq clusters are easy to get out and trouble shoot, but I have not looked at a GU unit. You should be able to swap out each individual gauge.