Search:

I took mine out last Sunday for a run up to the Sunshine Coast. 37C outside temp, briefly saw 38 for a few seconds. The factory Ti outside temp readings have always been pretty accurate. It was a...

Just thought to bring this discussion back up, particularly about the Infinity fan and re oiled OEM hub. Yesterday we Melbournians were treated to a 30 degree day. It only took 270 days for this to...

Yeah not sure tbh. Unless the td hub was not working right????

Sent from my SM-P600 using Tapatalk

Too much silicone doesn't prevent the hub from "locking up". Actually, the hub never locks up. It just turns at an increasingly greater % of engine speed as the bimetal spring opens the valve...

Tragically, lives have been lost whilst rock fishing along WA’s rugged coastline.

The attached are initiatives, from memory, from a father who lost a son, and implemented by the Department of...

He made two visits Robo. Second visit he put duct tape over his plates. You don't do that if it's stolen. He owns it.

Distinctive. It's been seen by others around Werribee. LED light bar is held...

Hey did not read all of this but one thing to remember with a diesel and temp riseing

if you lift your foot so your not pushing fuel into the pots it will stay cooler both egt oil temp and water ...

I went for a 16 X 8 in a Neg6 offset and they ar perfect. The tyre is inside the guard and no scrubbing at all.

I still have 3.9 ratios and the TD turns them easy but real keen to find some 4.3s...

Slightly smaller in diameter by a poofteenth. Thicker and larger blades though.

Sent from my GT-N7105T using Tapatalk

This seems to be the oil to use according to many other users on the interwebs. I did drain my hub out first, but I still think I need to add more. Time will tell....
And thats the fan I used.....

Got a link for the fan? As for the oil, not sure of the grades, I just bought two bottles off the one that everyone uses part number 08816-10001, 18ml bottle, and used 1 and a half of it. I did drain...

Hey Robo. I replaced the fan with the G35 fan, it fits the GU hub, not the GQ hub, added more oil in the viscous hub, and put in a UFI radiator. I also put in a high flow thermostat. Not sure if any...

Yes it needs to close the port. I have even seen people put a small spacer on the bottom to make sure it closes.

Whichever way you go you need to make sure that the thermostat will close the bypass port in the thermostat housing. This helps a lot. If the thermostat does not close the bypass port when it opens...

Back to reality, My childhood is filled with memories of my father. He used to take me with him when he "did the rounds" from Moora to all the farmers and stations in the area. He always knew where...