28th March 2012, 05:17 AM
Blocking the EGR will help stopping hot exhaust gasses from entering the combustion chambers and will lower EGT’s. It also reduces the chance of the inlet manifold runners becoming restricted by the...
27th March 2012, 11:30 PM
sweet as mate
keep them piccies a comming ....we luv piccies
24th March 2012, 12:59 PM
A bit of care is needed comparing EGT's between vehicles due to sensor placement, however...
500 degrees under load is perfectly normal for a CRD on song under load (ask anyone with an EGT on a...
24th March 2012, 08:49 AM
Grimace, I have an 07 model CRD all standard motor and exhaust. A mate with a DI consistently returns EGTs at least 100C lower than mine, and this would appear to be the case with them all [as...
21st November 2011, 09:01 PM
There is a couple of products on the market, I use a CRC one . About $25 from memory ...
24th October 2011, 04:10 PM
24th October 2011, 08:51 AM
Your front axles should have 31 splines.
13th October 2011, 10:33 PM
Crap gets in anyway mate - hubs are not the best "crud avoiders" when it comes to water and the like, so as long as it's not a large hole we're talking about, go for it .. Maybe use some instant...
1st October 2011, 05:28 PM
were abouts are you on the coast mate iam happy to help i have a intercooler pipe with a fitting brazed on ready to go if you like and iam happy to weld ur pyro fitting on
28th September 2011, 07:56 AM
If you're over 1.9mb, then try this link to resize your images:
http://www.nissanpatrol.com.au/forums/showthread.php?1412-Picture-sizes-and-how-to-reduce-the-size.&highlight=resize
27th September 2011, 11:31 PM
Im tipping Tod is spot on here with he's diagnosis. If you need help resizing images just post back here & we can help.
27th September 2011, 10:42 PM
try loading to photo bucket then posting
19th September 2011, 10:21 PM
When we ordered the steingbaur chip we were offered a boost gauge and this is what was supplied.
Then when the 3" exhaust was fitted again this is the pyroguage that was suggested.
As we bought...
19th September 2011, 09:58 PM
Hey mate, if you have the CRD have at look at the Scangauge II . That will cover your boost and with the EGT just got to the forum store.
if you go for the gauge then boost you need upto 20-30psi...
16th September 2011, 09:12 PM
A bigger exhaust will compliment the chip nicely and as Snicko said make sure you install boost and EGT guages.
