Search:

Maybe I was I was just lucky, I received better treatment then the above. The purpose of the post was to explain how I did the job. You can buy from anyone. My initial problem was to find the right...

NEVER buy from this crook. I bought an alternator from him, lasted two weeks. Got the wife to take it back, he refused to warrant it saying it has had water it in.

How long is a piece of string? It all depends if you want to experiment with your cash.

A reputable company will sell you a tried and tested product.

Recently talked to an HQ owner that...

When I did mine I used a Superchaep Auto "foot operated dip switch" that I screwed to the side of the foot rest to engage/disengage the lockup.

A toggle switch on the dash to "arm" the lockup IE...

Sorry just re read your post , if it's too steep and you're revs start to die just flick it off .
I've done the cheap arse lazy barstard install and just have one stepped relay with one off on...

Best used for towing only , mine is a TD 4.2 and I have to be over 60 or it labours the motor so no good for off road steep technical stuff .
Leave overdrive off when using the torque lock but if...

As I posted, just a little oil as you don't want to cause it to hydrolock and bend a rod.

Gas is hard on valves. One easy test to see if it is rings is to squirt a smidgen of oil (not too much )onto the cylinder wall and crank it over a few times then do another compression test. If it...

I got a complete kit from online auto parts about 3 months ago for $167.00. NSK bearings and everything was there as advertised. Time will tell I guess. I have brought quite a bit of stuff from them...

Cheers mate. Japanese bearings for the win. Once you have read a few ads you should be able to see the differences. Full rebuild. Terrain Tamer is great. Any dramas mate just post your question in my...

Totally agree Mark. Once you have that front swivel assy in bits the last thing you want to do is skimp on a secondhand bearing that craps out 10,000klm later and you have to tear it all down again....

Depending on what brand the kits are. Go for Japanese made bearings, a bitta research/ google will be needed on your behalf for this, you will pay a higher premium, but you get what you pay for. I...

Hi, I ordered two repair kits for my Nikki carb from ebay. One for use and other one to keep in store. But i couldn't use them. Because it seems low quality.
Comparison of Old kit and New repair kit...

If you know someone with an ultrasonic cleaner they can be useful too.

Carby cleaner from Burson, Repco, Supercheap Auto, etc is something that comes handy.
It's more penetrating than petrol.
Tooth brush and carby cleaner can do lot of work.
But, if the soot is bad,...