Search:

Rear ac control.

Hey blokes, I needed to knock up a shelf for the back of my truck and wanted it to be light, cheap, easy and look neat. It didn't have to hold lots of weight, I intend using it for lighter stuff.
...

Gammon Ranges
http://i1127.photobucket.com/albums/l628/aj4wd/stuff/IMG_3211_zpse3c000d1.jpg

Mt Chambers Gorge
http://i1127.photobucket.com/albums/l628/aj4wd/stuff/IMG_3232_zpsb502ac34.jpg

Mt...

A bit of a break down on what it cost me!!!!!

Motor,gearbox,bolt ons and wiring - $3000
Marks adapter - $2300
Sump -$600
Genie extractors - $500
Fuel pump and reg - $200
Rebuild gearbox -...

Well for some time now we've been wanting a draw system for the back of the Q. Buying a pre made one was out of the question, especially as the father in-law is a carpenter... :049:
So after a bit...

Hi Guys,

Check out this link, some good info on recoverys and links to reference material at the bottom of the page.

http://www.pirate4x4.com/tech/billavista/Recovery/index.html

Steve.

The ground pepper will not dissolve and will work into any small pin holes and block the way similar to the chemi-weld stuff you buy from auto stores i believe.

Junk your HiLift Jack mate and buy...

Free download of our first Nissan Patrol magazine (November Issue).

As time prevails these magazines will get bigger and better. Any feedback or ideas are welcome for the next issues!

NOTE:...

You will need a 22mm spanner and socket (or 2 spanners) for control arm and panhard rod nuts and bolts, 24mm for radius arm bolts
both electrical and 100mph tape
assorted cable ties
The kit AB...