Search:

Well though i would post a few pics.

Bought by 2011 GU CRD AUTO about 2 months ago now - was very stock standard on purchase, but a pretty clean rig under 70ks

Its my daily drive, but want it...

must take top and bottom out for even pressure.
10,000k since i took mine out, and not a hint of the return of the death wobbles....

actually, did a little more digging -rather than give you the wrong info - heres the exact spec from the service manual
...

well ive got a EGR solid plate - not hole it in - when i scan with my wifi and iphone using tourqe its got a fault code of low EGR flow, but no dash light - never had one yet. Im in a CRD but out of...

this is another good video on the same subject and explains it well
https://www.youtube.com/watch?v=xPLgglRbDF0

http://www.are.com.au/Inter/topMountIntercoolers.htm

it could be lots of things, that's the point of that light - its a warning that says you need to get it checked ASAP. You need to get the codes read to find out what it is and not drive it much...

Ok - so i know some will say use the search - but i have.
And once you read my post below I am sure some will say yes, and some will say no - this is the problem with the internet i guess ....
...

Well there you go - a few hours in the garage today, removed the shims of both front wheels, and wallah -no more wobbles.
Still a slight vibration right through the speed range, so in for a balance...

Wow - took me a while to read through this thread - interesting jobs in here.

Reckon the Building/Construction industry wins for the most patrols owners in a particular category

I'm the same,...

Welcome Dom
Pretty new here myself.
Get in the mechanical section and you will get good recommendations and tips, and the search function
Ive found so much info here already.
Show us some pics of...

Gday All,

Newbie to this forum.

Previously had a GU IV 2004 - became a grenade at 90k, but Nissan came to the part with a new Motor

Then went to the dark side for a few years
100 Series V8...