Search:

No , it isnt pointless, on the contrary. First of all, the air temp in the engine bay is always lower than the air pumped by the compressor; also, the air enters the engine bay from the nose of the...

Havea look here http://www.nissanpatrol.com.au/forums/showthread.php?7013-Gu-2.8-hot-start-issue ive recently fixed my hot start problem and posted some pics how to do it hope it helps

Thanks heaps guys. I found some info relating to the pump but dont know how to put links in. The part numbers are as follows.
O-Ring 16826V0700 (Nissan part number) But also apparently a worldwide...

G'day John, the coolant reservoirs are for the radiator HEADER tank, that's the one on top, the one on the bottom is the OVERFLOW tank, and should never be higher then the mark thats marked on the...

You can put in a dynamco for half the cost of a genuine fob & get two remotes though. Just involves a little more work.

Might mean you only need the controller if you already have an actuator in...

Dave - if yours is an ST it should already be installed. All you have to do is get a remote fob from Nissan.

Hi all,

Disregard the previous post asking for a pin out for the central locking control module. It's gone.

I was a bit sick of the short range of the factory remote, and I'd drowned one and...

I boughten self the super cheap auto tube bender.
So I thought I would post some pic's of how it bends.

1st pic is a test run.
You can see the kinks on the inside. The pipe was also a bit...

Here are the hose codes for any one that needs them these are Mackay hoses available from Super cheap
Suits Patrol rd28 6 cyl 2.8 T/diesel 10/97-4/2000
Top hose - CH2291
Bottom hose - CH2292...

A very, very complex field that essentialy is governed by what you "need" from the EGT indication. By that I mean for example turbine engines where 980 deg is eco cruise, 1020 is max cruise, 1032 is...

OK, this sounds like a challenge.

All your lights (such as headlights) all the body electrics like interior fan, wipers should still work.

Are you using the old TD42 engine harness?

The...

Hi Guys ,just a thanks for this thread. I'm on my first fourby as is my mate. I have advised all my mates that before our next adventure we are all to have the proper hitch. no excuses. Cheers.

Just a little report / feedback for those who have a dual mass flywheel that needs attention, and don't know whether to convert it to single, or go with another expensive dual mass. Here is what I...

its worth noteing here that some times where the main bearing in the compressor goes as it gets hot it damages the seal in the front of the compressor makeing it leak so if it has you will need a new...

Leigh,
Yes it does, The reason I wanted it mounted on the fridge is so that it wouldn't be on all the time that the fridge wasn't operating and so that I could monitor the temperature as well.
In...