Search:

Speak to Gecko, he has the 6.5 in his troll and will able to answer your ?'s


Sent from my iPhone using Motorculture mobile app

Id run 40 make them last and wear better that's what i have in my micky mtzs at work we never put what's on the side wall as that's a MAX pressure so ya need to allow for expansion on hot days and...

I think 65 might be their safety margin!

38 is fine never put 65 in them ,
When I brought my Patrol I was disappointed in the ride thought it should ride "softer" than it did.
Went to check pressures and all 4 were on 65psi, I rang the...

Well done m8 u got there, thanx for posting up what the issue was always good to get that sort of feedback

Good job on finding and fixing the problem.

can you wiggle the globe in the socket? if you can squeeze it a little so it hugs the globe tighter as its the socket itself that supplies the ground for the globe....i just did tjus with an...

OK....my little black book tells me that connector C1 should be a black connector with 8 pins

If you look at the bottom of the wiring diagram, second connector along you will see the 8 pin...

With a test light check you have power (park lights on) in the Blue with a Black trace wire at the connector at the back of the RHR tail light.

If you have a genuine trailer plug fitted there will...

It might be time to get the multimeter out to see whats going on then easy to eliminate from there

I had a similar problem with my GQ it ended up being the dam scotch locks for the trailer plug.
Just worth checking first.

Id say you have a loose earth wire on the back of your socket, cheak all wiring running to the rear of the lights. If the earth has come loose stick it threw the socket and then put a bit of solder...

May have removed the lead off globe try new globe or emery globe socket

Gday mate welcome aboard

Gday Kano, Welcome to the forum. Plenty of advice here to browse through. Goodluck mate