Search:

G`day everyone.
As I have done all the above trips plus many more I agree with all the above advice
1 Keep it light.
2 Keep it basic.
3 Make sure it`s in top...

Gooday Mitchelljames, I've done most of the big trips to which we aspire and the one piece of advice I'd offer is try to keep your weight down. The more weight you add the less capable you make the...

Be carefull with your carpet. I pulled mine after windscreen leak and replace all the underlay with closed cell foam so it could not soak up water. The problem was after cleaning the carpet it shrank...

Well guys when i removed the back section of carpet i found a substancial amount of engine oil under the carpet and as i found out they knoced over engine oil in the back so i had to do a bit of a...

I have finished half the cars underlay now i just have to go and get some quick grip to glu the underlay down in a couple of sections so when it comes time to install the carpet it can be done with a...

Just to let you know guys that once you cut your passenger or drivers side front underlay the left over piece fits the opposite side

And i purchased the carpet and sound proof underlay from all...

Here is my progress so far looking good just a little slow as limited time after work

Hi Guys i have just started to remove my carpet in my GU for replacement and thought u guys might be interested.
I have also bought a ARB CKMTA12 - Maximum Performance On-Board Aircompressor which i...

Whoops well maybe I'm on wrong site lol

Anyway here pic look if u dare
http://i717.photobucket.com/albums/ww173/largey/Snapbucket/83fdb802-2dfa-4fb9-ace1-a9102ee06e9b.jpg

After lining up with above mentioned referenced point, I am using a tie-down strap and my 12 volt pump to reseat the bead, just to make sure I can do the same in the bush. It seated far easier than I...

Starting the removal with 'trusty big lever' and then hold with foot while proceeding with another lever.

4656

Here I'm cutting the plug off as close as possible.

4657

Place the patch...

The next shot shows the bead breaker attachment for the jack. Some folks will use the whole foot of the jack, with varying success. I believe crushing the whole tyre profile down would have to damage...

It had been a long time since I had done a tyre repair, apart from a couple of plugs, so after checking a slow leak and finding a puncture, thought I would do a plug and patch, and to familiarize...

As promised, here's a bit of a guide to installing a basic dual battery system. This was performed on my 2.8td GU Patrol so results will differ between other models, and they may differ between other...