Search:

Yeah you could be right about that, I don't have ac! But if you are going to replace the engine fan with thermos maybe you can use it anyway?

Happy Birthday George! Hope someone else is cooking the spit for you today and good work on the gun license there is a few of us getting them recently!

There is a threaded bung in the drivers side of the radiator on the back that you can put a temp switch in. I got one from a 3 series bmw that turns on at 92 deg and off at 87. I use this to turn the...

Mild modification list (in order)
Nads (egt, egr block, dawes and catch can) + scanguage
2 3/4 exhaust
Braided brake lines
New brakes (if required) slotted rotars and A1RM or greenstuff pads
2"...

Use a strip of Aluminium instead of washers, doesn't need to be as wide as mine but will support the flare nicely.

Dab of sika on the rivet will seal up the hole also and help prevent rust.

Looks great Winnie, did that get rid of the rear quarter damage BA did?

These are the type I have and I assume smoothrun has also, larger latch and it locks in and out.

50928

Not a fan of drop radius arms personally, the only thing that really corrects a radius arm geometry (and castor angle) after a suspension lift is drop boxes. The reasoning behind this is that it...

I know where you are coming from Smoothrun, the only thing I can think of is that Rossco and Winnie have set up their slides so that the drawer closes before the locking slide locks? Otherwise they...

Yeah I know the feeling Darren, so many choices, I am looking at a 30-06 also my current favourite is a Tikka T3 though, have you tried one?

Here is my effort Friday/Sat with a borrowed 308 howa...

Locking are great because they hold the drawers open as well as shut, BUT you only really need one locking slide per drawer, so if you are making a pair of drawers buy one locking pair of slides and...

I have UES slides, quality is fine and by far the cheapest. From memory I have 1000mm full extension 120kg slides.

I am not fussed she would still be smoking hot with a buzzcut!

Done! 146 now!

Cuppa, I work for AL-KO who make electric brakes and drum hubs, it is no problem at all to change the drum hub over from 5 stud to 6 stud. There is only 2 or 3 bearing types it will be and hub drums...