Printable View
G'day all,
Back again, you all were so helpful last time, I thought I would try again.
Looking for a GU Kitted up with all the fruits ( as we call it here in the office)
It will be for a feature for issue 4WD action 174
So if you think you have the 4WD that is decked out, kitted up, sprewsed up, has all the fruits etc.
doesn't matter which way you say it. Post some images here, give me a PM and/or email me.
I just can't wait to see what I get out of you all this time
Hey Jason, Here i am again mate
Below is a pic of my GU IV TD42Ti. It is running 3" Old Man Emu Comp spec suspension, Drop Boxes, Superiors Drag link, Tie Rod and rear lower Trailing arms, Black widow in the back. Icom 400. Now running a set of 35' Cooper STs and loving it.
At the last 4x4 show i bought a 2.5 awning and a 1.2 awning from ARB that will be here in a week or two and will be fitted to a full length rack. I have a 42inch LED light bar on the GQ that can go on the roof on the GU too. I will also be fitting a Tigerz11 winch to the front in the next couple of weeks and could bring that forward for a shoot no probs
http://nissanpatrol.com.au/images/GU...g?t=1293705352
I'd be happy to be part of your mag mate
Cheers Darren
G'Day mate, i would do almost anything to get into the 4WD action mag LOL.. Im 21 and an Auto-Elec by Trade.. I Have a Series III GU Patrol 3.0 ZD30 which is my Tourer.. Has the Dawes and needle valve, EGR block, Intercooler Thermo Fan (also known as NADS - Nissan Anti-detonation System) haha..
I have:
-TJM Bar with sealed LED replacement lights
-TJM Snorkel
-A-Piller pod with VDO Pyro and Boost Gauge
-Lightforce 240 with HID kits
-HID headlights
-3" Ridepro lift
-33" BFG KM2 Muddies
-9500 Winch
-Homemade Rear draws with LED Interior lights inside them
-Homemade Rear door table with LED light for at night
-Roofrack
-ARB 2.5m awning
-Shovel and Axe holders on roofrack
-Homemade rear Worklight
-4 Spotties on roofrack all HID
-Dual Bat
Probs more i have forgot as well
Will also have 3" Exhaust and chip in next couple of weeks as well, can see some of my pics in my build thread
http://www.nissanpatrol.com.au/forum...etcha-s-GU-III
Bump.....
Anyone else interested out there?
Would love to fletch but don't think I have enough of the "fruits" and we are too far away anyway.Quote:
Originally Posted by big_fletch
Sigh... if only.
Not sure if this would quallify, but it does have a few suspension and engine mods.Quote:
Originally Posted by big_fletch
3.0Di Turbo Diesel 4 Speed Auto
Safari Dtronic & In Cab Adjustable Fuel Control
Turbosmart Fuel Cut Eliminator
3" Stainless Steel Custom Exhaust System
2 Stage Dawes TDi Manual Boost Control System
Crosscountry4X4 Intercooler & Fan
Trans-Go Shift Kit & 1K Ohm Dropping Resistor
Manual Converter Lockup System
Front Auto-Locking Diff & Manual Hubs
Front & Rear Steel Bars With T-Max 9500lb Winch
PIAA Headlights, Foglights & HID IPF Driving Lights.
Nissan Snorkel & Towbar
Suspension Stuff 2" HD Ultra Flexy Coils & 30mm Poly Spacers
ATOC Re-enforced Rear Coil Towers
3" Tough Dog 45mm Big Bore Adjustable Shocks
3 Degree Superior Superflex Radius Arms
3rds Production Adjustable Panard Rods
3rds Lower Rear Control Arms & Adjustable Upper Arms
Superior Solid Chrome Molly Drag Link & Tie Rod
Full Length Rhino Roof Cage & Bag
Milford Cargo Barrier, Waeco 70L Fridge
Duel Battery System With 800 Watt Invertor
Simoco SRM9022 80CH 25Watt UHF & Codan 100Watt HF Radios
Kelly Safari TSR 285/75 Tyres
Some Web Links & pics.
Full 3" Stainless Steel Exhaust/4" 100cpsi Metalic Cat
Delphi Sedimenter & Walbro Lift Pump
In Car PC & Monitor.
Custom Interior Floor, Drawer & Rear Power Outlets
Manual Converter Lockup Switch
Manual Boost Control
Gauge Pod
Intercooler, Fan & ProVent Air/Oil Separator
http://www.nissanpatrol.com.au/forums/
http://www.chaz.yellowfoot.org/images/Dash14.jpg
Gee that's a small list of mods Chaz lol. Looking good mate.
no kidding. I wish my troll had that stuff....Quote:
Originally Posted by guterra
Yeh, sorry. There are a few more things to come, but it's just getting too heavy...........lolQuote:
Originally Posted by guterra
Chaz, you got drawers in the back?
(didn't see it on the list)
edit: woops just read it again
Yeh, just a small single drawer. I didn't want to have to use a ladder to get into the fridge.Quote:
Originally Posted by Mazodude
http://www.chaz.yellowfoot.org/images/Interior_2.jpg
I love your Troll Chaz, you have spent alot of time and care building it and it shows.. Awesome bit of Kit mateQuote:
Originally Posted by Chaz
Fletcha
Thanks Fletcha,Quote:
Originally Posted by big_fletch
Your Troll's build up is coming along nicely too. It's looking like a well kitted and capable tourer, well done.
G'day all,
I've just posted to some of you personally (PM) however most that has posted here have got some awesome mods done, please email me your mods and pics to jason@liddell.com.au.
Love the interior there Chaz, what instruments are you running on the console (is that a tablet or pc screen etc) good roof rack too
I've also organised a photographer to go to SA adeliede due to demand I'm receiving there with wicked 4WD's so probably not to far away from all.
IF YOU DON'T POST YOU WILL NEVER KNOW IF WE CAN DO IT.
G'day all,
with have definiate dates now, its going to be the 8th and 9th October (weekend) and will be in Lithgow, please let me know if anyone with a GQ and early model GU are interested, thinking of going myself and would love to meet some of you guys and gals.
hey all, searching for a GU Series 1 for the cover, will need to look the part. anyone here got one?
As I live in SA I have Emailed you pics of my rig with a list of accessories added!! Not sure if its enough but like you said "You'll never know..."Quote:
Originally Posted by Jason L
Go Snicko you'll get my vote;-)Quote:
Originally Posted by snicko