Printable View
Hey Guys,
Just finished building my Spit & thought I'd share the pics. The Legs are 20x20 RHS, Base is 3mm Mild Steel, Lid is Stainless. The Shaft & Motor I got from a mate who picked up a few cheap ones.
Now I just gotta shoot a Deer or Pig to try it out, LOL.:049:
Very nice - forum meet up at your place for a spit???
We're on the way mate....LOL.....looks bloody sensational!! Well done
excellent job mate venision and pork yea ill be in that -----lol
Top job Hendo!!!
What a ripper there mate, don't forget the photos of its christening.
LOL, More pics:
where you going to plug that in up the bushQuote:
Originally Posted by Hendo 70
Thought bout that, I just take the Geny with us, lol
Hendo, thats better than a bought one mate, well done!!!
I need to get me one of these....Next forum meet up at hendo's....lol
good idea mate lolQuote:
Originally Posted by Hendo 70
the boss has spokenQuote:
Originally Posted by AB
we are all on our way hahahahahahaha
Fired it up today and took a couple of Pics to wet the lips.:thumbup:
so what times dinner?
I've got a slab, you've got the roast so lets get stuck into it...LOLQuote:
Originally Posted by Hendo 70
Looks great mate, nothing like a lump of roast pork and spuds in foil yum yum
http://www.nissanpatrol.com.au/forum.../2011/09/3.gif
Thats just narly dude.............................. Bloody love ya work.
show off LOL
Tim
Gunna jack ya thread for a couple of pics Hendo,
Here's ours in action at Outback Challenge in 06
Made from 2 star droppers with bits of 4mm thick angle welded in 5 spots, it uses the gears off a 12 speed mountain bike we bought from a garage sale for $10, and that is turned by a Datsun 180B wiper motor with a 2 amp fuse in it we then stuck a bit of galv plate near the motor to shield it from heat.
It has a boned out pork forquarter on it that has been wrapped completely with the skin to get 360 degree crackling!...it works a treat and never even made the battery disconnect on the car it was running on after 3 1/2 hrs, we even put a 21kg full lamb on it and it still turnd with no drama's...its a trooper!
far away pic,
http://i65.photobucket.com/albums/h2...utback0170.jpg
and close up pic,
http://i65.photobucket.com/albums/h2...utback0171.jpg
Hope ya liked,
Steve.
Another great setup, thanks Steve
Yep.... Very much indeed.Quote:
Originally Posted by -ET 4wd-
Thanks for the post.
Mmmmm now I'm salivating...... Great job guys
Awesome have always wanted to make me one, how much did it cost you to make?
i hope the spits are comming to loveday / mabe have a comp for the best spit and comp for the best roast then we can all try the fine fair
Nice work there lads!
I spent a few years up in the North of PNG and the locals had a different spin on things for the whole spit setup.
We used to kill a small pig and do a spit at least once a month and had a great time.
The guys had a 4m length of 25mm water pipe with a cap on one end and a Toyota Steering wheel on the other. We would build a good fire, spread it out about a metre and then a Y at each end. The water pipe would be loaded up with the meat and spanned the fire supported by the Y pieces.
one of the kids would sit there and turn the wheel ;) The kids would take turns and it always came out a treat. I dont have a pic damn it.
great job ,,, i looks nice ,,
would love one
thanks Cam
I likey, looks like it worked well
Awesome job, it's making me hungry!
best homemade spit ive ever seen