Ideas for running power to roof-rack?

Hello all, as the title suggests, I'm looking for some ideas of how to run power to the roof rack. I'm not too excited about drilling into the bodywork up high in case of water ingress. At the moment it will be for some led lighting on the rack but possibly a solar panel in the future too.
Any ideas or photos much appreciated [emoji106]

.......from under the great down under.

Drill a hole in the roof




























































Or run the cable through your barn door hinge side

This is how I did mine for the solar


Attachment 87392

Tis' how mine is....
Attachment 87393Attachment 87394

I had mine running out the corner of the front door pillar with a cut out in the pinchweld, was ok but looked crap. I changed to a hole in the roof with an aluminium junction box. This worked well and was heavily disguised behind the leg of the roofrack. Neve had an issue with water leaking and intended on simply putting a gromet in the hole if it ever needed to be removed. Ultimately it was not the easiest set up as it required the wiring to go inside the B pillar and the roof liner - ended up tearing the pillar plastic vinyl sheet. I like the idea of the rear cabin vent as its designed to shed water also.

Quote:

---

Originally Posted by jff45

This is how I did mine for the solar


Attachment 87392

---

This is what I'm going to do (one day)

Quote:

---

Originally Posted by mudski

Tis' how mine is....
Attachment 87393Attachment 87394

---

And this is how it is.

Sent from my Pixel 7 using Tapatalk

ARB sell a Gland specifically for this.

In the GQ I ran it up the B Pillar and out the top of the rear passenger Door for many many years. With the last big build I drilled a hole in the roof and happy with the result. The roof rack is welded to Mt body and is never coming off. Water will never get in. I remember MegoMonster had his roof drilled by the Dealership on his brand nee GU, blew my mind at the time, but the lights are there forever.

Quote:

---

Originally Posted by MudRunnerTD

ARB sell a Gland specifically for this.

In the GQ I ran it up the B Pillar and out the top of the rear passenger Door for many many years. With the last big build I drilled a hole in the roof and happy with the result. The roof rack is welded to Mt body and is never coming off. Water will never get in. I remember MegoMonster had his roof drilled by the Dealership on his brand nee GU, blew my mind at the time, but the lights are there forever.

---

What is it that ARB sell?

.......from under the great down under.

This is how i did it on the old GQ. . .Attachment 87416

Quote:

---

Originally Posted by taslucas

What is it that ARB sell?

.......from under the great down under.

---

Check out this link and scroll down to BaseRack Wiring

https://www.arb.com.au/roof-racks-ca...snippet-152532

Check out the gland. I could not find it intheir list but it exists, ask your local ARB.

Attachment 87419

Ahh! Nice

.......from under the great down under.