G'day, all. Here is a quick video showing the pros and cons of steel and alloy rims.
https://www.youtube.com/watch?v=lWM3o2v46KI
Printable View
G'day, all. Here is a quick video showing the pros and cons of steel and alloy rims.
https://www.youtube.com/watch?v=lWM3o2v46KI
Video froze near the end but I didn't hear him explain how a hot alloy being rapidly cooled in a creek crossing can affect lug nut tension and if your not on the ball could lose a wheel .
I prefer metal over alloy .
I would probably flog off the alloys and buy some steel rims if I ever upgraded to a GU.
The video played ok for me.
there is ronny dahl channel looks like steel is better option for proper 4wd
if you dammage a steel rim it can always be pannel beated out on the beed rim that is
I have seen some alloy rims on road vehicles, that have had their bead welded after hitting pot holes on our beautifully smooth (cough cough) local roads. Not sure I would trust the weld.
@alloysfallingoffhttp://www.nissanpatrol.com.au/forum...2017/12/55.jpg
Sent from Note 5 using TapaPro
In other words do it up until you snap the stud, then back it off half a turn! I did not realise that the alloys rely on the stud so much. It makes sense to change out the studs periodically while running alloys.
That's exactly the way I read it , another good reason to go Steel rim I reckon .Quote:
Originally Posted by mudnut
I run the alloy rims on both my Patrol and Caravan and never had an issue. In 2013 we did about 12,000km including Cape York and 23,681,132 corrugations on the PDR.
Patrol has now done 120,000+ kms, I always use a tension wrench and torque to 133nm as specified and I use the indicators as supplied by Nissan. Always check the torque setting on a regular basis and never need tightening.
We've done some pretty rough and rocky tracks and touch wood no major damage to the rims, just some minor scratches.
Maybe I shouldn't push my luck but with two sets of tyres and alloy rims I'll keep using them.
Do I detect a lotto win, go on go the UQuote:
Originally Posted by mudnut
I love the look of the GU4 ally rims. But considering they're 17's, tyre prices are inflated. Well they were when I was in the market for a set. So set of 16 steelies, was a no brainer. Plus its easier to find 16" tyres should one be desperate.
Wouldn't it be noice, but no!Quote:
Originally Posted by threedogs
My 5 cents worth... If the discussion is indeed Steel Vs Alloy Rims for offroad use then the answer is unequivocally Steel.
Alloys evolved for two reasons, one, Bling which is totally irrelevant offroad and two, reducing the unsprung weight for improved handling, high speed braking and low frequency damping which are almost irrelevant 'off road' but very desirable qualities "onroad".
Steel increases unsprung weight and the advantage of that 'offroad' is better damping of high frequency vibrations.
As far as rim damage/failures then steel is more likely to be salvageable to at least some extent while alloy is much more brittle and will tend to crack or have a catastrophic fail rather than deform.
The different expansion rates between steel and alloy aren't a real biggee IMHO but the advantage would lay with Steel if the rims are getting a lot of heat transfer from a large amount of work on low pressure tyres
I learnt a new word and true reasons today, thank you as always ET good man :-) I do ‘Unequivocally’ agree with your perfectly worded advice above.
I dare say my personal experiences of old with dangerous as hell alloy rims I may have used swear words like ‘poopoo’ they are and to stay well away from rocks offroad with em :-( Light cracks may be started on them whilst offroad and very well may let go on a highway home days later!!
Sent from my iPhone using Tapatalk
Best $95 Dynamic Steelies (Cheaper than ROH) per corner ever spent some years ago on the Golden Gramps GQ [emoji23][emoji106][emoji106]
https://youtube.com/shorts/gk8bKeN2ADA?feature=share
Sent from my iPhone using Tapatalk