Printable View
Hi guys I’ve gone and bought myself an optima d31a battery for the patrol and i was wondering if any of you out there managed to squeeze it under the bonnet somehow. If so which battery tray did you use and how did you get it to fit.
Any help would be awesome
Regards
Jack
Sent from my iPhone using Tapatalk
I ran 2 under my bonnet for 7 years. 1 each side. No problems getting them in.
I don't remember having big issues fitting them. Tell me your trouble and I can have a look at my tray and see if I made any changes.
So basically it’s a series 2 gu and I wanted to put it in place of the main battery drivers side near the fuel lift pump. If I was to put it on the other side near the air box I’m worried it will hit the bonnet when it closes and I can’t find a tray big enough to support the weightQuote:
Originally Posted by MudRunnerTD
Sent from my iPhone using Tapatalk
Mrs MB and I have only been able to stock main battery GU 2000/1/2s under hood squeeze in the D27F’s I think they are/were. Always wanted the bigger versions but also very keen to find out how to also for sure Jack. Darren above may be referring to his GQ beast which do seem to have better battery space I think ?
Sent from my iPhone using Tapatalk
Nah I had 2 under the bonnet of t he GUIV for a long time. Only recently replaced them but had a great run. Let me see if I can find a pic on the forum.
This is the best I can find right n ow as I don't have a lot of pics of my GU
http://www.nissanpatrol.com.au/forum...2017/10/69.jpghttp://www.nissanpatrol.com.au/forum...2017/10/70.jpghttp://www.nissanpatrol.com.au/forum...2017/10/71.jpg
Sent from my SM-G955F using Tapatalk
Top work Daz! Reckon our current 2001 has from memory a fuse box between battery and driver that hindered getting one of those beasty Optimas. I’ll go for a walk and send pic soon too :-)
Sent from my iPhone using Tapatalk
Whoops, keep moving too many around :-) http://www.nissanpatrol.com.au/forum...2017/10/72.jpgCentury back in the family 2001 truckster main with D27 auxiliary. 1999 work ute with twin D27s http://www.nissanpatrol.com.au/forum...2017/10/73.jpghttp://www.nissanpatrol.com.au/forum...2017/10/74.jpg Stock relay box inbetween and stock battery trays in our oldish faithfulls seam to be as remembered our problem. Height of the bigger 31 actually never honestly considered either but seems tight looking just now too.
Sent from my iPhone using Tapatalk
Yeah I measured it with a tape and found it was about 5 mm to small but I’ll give it a shot tonight and let you know. Fingers crossed though.Quote:
Originally Posted by MB
Sent from my iPhone using Tapatalk
How’d you go Jack mate, we’re hoping for some good news here. Mrs MB’s ‘Century’ main will be due for replacement we reckon by years end its feeling like. Cheers!
Sent from my iPhone using Tapatalk