ZD30 glow plug issues?!?

Hey guys
So last night made the switch from ceramic to metal tipped glow plugs mainly because my old ones weren't working and on a cold morning even after letting them warm the car still takes 30 seconds of cranking before it fires up with heaps of white smoke out the back. Now since I changed the plugs last night I thought this morning it would fire straight up and to my disappointment it did the same thing as before. I have replaced the ecm relay under the dash and checked the 80A fuse for the plugs but they just ain't working??

Any ideas at all any input is greatly appreciated

Cheers
Jack

Have you checked the voltage on the glow plug busbar when the glow plugs are on?

The glow plugs main fusible link is 100amp not 80amp.

Metal tipped glow plugs won’t last long on a ZD30DI if you haven’t done the glow plug timer mod.

Have you tried pumping your fuel primer before staring when cold?

He's fitted metal tipped glows Yendor, does he still have to do the mod?

Quote:

---

Originally Posted by Daveyboyjunior

He's fitted metal tipped glows Yendor, does he still have to do the mod?

---

It's because he fitted metal tips he will need to do the mod. Sorry I will change my original post.

Haven't done the mod yet. Anybody out east/southeast I can pay to do it not comfortable doing it yet.

Will check the 100 amp fuses

Changing the glow plugs to another type won’t fix your problem if they weren’t faulty.

@mudski might be able to help you with the mod.

So one of the 100 amp fuses has blown but i have no idea what set it off. It's the fuse closest to the motor next to the fuel filter

Quote:

---

Originally Posted by JackCollo

So one of the 100 amp fuses has blown but i have no idea what set it off. It's the fuse closest to the motor next to the fuel filter

---

That’s the glow plug main fuse.

Quote:

---

Originally Posted by Yendor

It's because he fitted metal tips he will need to do the mod. Sorry I will change my original post.

---

that means i'll have to do the mod.
whats the problem that requires the mod in the first place?

I've been told a lot of different things about the timer mod. Is it 100% necessary or is it more a choice.

Got a new 100amp fuse and will battle through to swap that over and get back to you.
If it blows again I have no idea what I'm gonna do.

The 100amp fuse might have blown if there was a short in one of the old glow plugs or if the wire between the glow plug relay and glow plugs has shorted to ground.

Hi,, is there a link for the mod..
cheers.