Printable View
Hey all,
Just wanting some insight on potentially swapping my bullbar indicators/parkers for LED items. My current ones are looking dull, cracked and worse for wear from the sun and weather. I was wondering if LED versions are as simple as unscrewing the old ones, and fitting the new ones. Has anyone had any good and/or bad experiences, and can off me any advice or suggestions to a specific brand/product. All feedback appreciated. Thank you.
I know @lucus30 installed some LED lights in his bull bar, pretty sure they were done from scratch as well cause he didn't even have the standard ones.
Hopefully he'll see this or someone else and point you in the right direction
Sent from my iPhone using Tapatalk
Yes they are. I'll try find the link he sent me
Yeah sure did the 175aw are a perfect fit and a great product too.Quote:
Originally Posted by Bacho86
You can buy them on ebay. This was just the first link that came up
https://www.ebay.com.au/itm/161075836644
Sent from my iPhone using Tapatalk
Bet me to it lolQuote:
Originally Posted by lucus30
Just keeping you on your toesQuote:
Originally Posted by bigguwesty
Sent from my iPhone using Tapatalk
ARB sells LED ones for their bullbars. Perfect fit. They are around $70ish from memory.
I just brought some from TJM straight swap over about $80
Very happy should of done it years ago when I changed all globes to LED..
They look like 175AW'sQuote:
Originally Posted by threedogs
No idea,,,,lol they have a very amber indicator and 4 x white led for the parkersQuote:
Originally Posted by lucus30
Yeah thats them. Same as the link i posted earlier on ebayQuote:
Originally Posted by threedogs
Yes they are the same ones mine came out of a TJM box, not sure on the part number.Quote:
Originally Posted by lucus30
very easy to fit they just click in place, solder and shrink sleeve all wires.
Thanks boys.
The eBay link were the exact ones I was looking at too.
Sent from my HTC_0PKV1 using Tapatalk
Seems more worth while installing these instead of just changing the lenses on my current ones. Just gotta get hold of a soldering iron and some experience lolQuote:
Originally Posted by threedogs
Sent from my HTC_0PKV1 using Tapatalk
Fully waterproof to boot whats not to like ,plus you'll also need to either fit a designated LED flasher relayQuote:
Originally Posted by bsteveo
or you can solder 50 ohm resistor in line to stop the "fast flash" effect.
Forgot to mention this before its an added cost but not much relays are less than $20
Pop over if you get stuck more than happy to lend a hand, lol
Yeah mate easy to do. Happy to give you a hand if you are local to me?Quote:
Originally Posted by bsteveo
I haven't changed my flasher because I've still got incandescent indicators in the circuit but yes if you go all LED's you will need to replace flasher can or use resistorsQuote:
Originally Posted by threedogs
I have full LED everywhere, love the instant on off effect,
Pic is of some of the globes Ive used
Even headlights ? [emoji14]Quote:
Originally Posted by threedogs
Sent from my HTC_0PKV1 using Tapatalk
No my headlights are 100 watt HID which in hindsight was a
poor choice, great light but way too hot for the plastic reflectors
No sure LED are there yet to replace hi-low beam.
Located in Melbourne's west.Quote:
Originally Posted by lucus30
Sent from my HTC_0PKV1 using Tapatalk
Righto im SE melbQuote:
Originally Posted by bsteveo