Printable View
Hey guys.
I have another question, j have a 97 2.8td andi have no brake lights at all. Any suggestions?
I have checked the fuses and the bulbs, i plan on getting a multi meter tomorrow and checking if there is any current running.
A guy from work was saying that it could be the senor from the brake pedal that has stuffed up.
If anyone has had this or has any suggestions would be greatly appreciated.
Cheers Damo
Sent from my SM-G900I using Tapatalk
Re check your fuses for sure. Swap it to be sure. Start with the multimeter.
The little plastic stoppers that activate the brake light switch on the pedal can get brittle and break. Then the switch cannot be actuated by it.
What NN said ^^^
If bulbs and fuses are OK next most common culprit is the switch high up on the back of the brake pedal
Thanks for the replys guys, ill check it out tomorrow and keep you posted.
Cheers Damo
Sent from my SM-G900I using Tapatalk
If it is the switch on the brake pedal where can you get a replacement?
Cheers Damo
Sent from my SM-G900I using Tapatalk
G'day Daymian,
generally (or at least sometimes), those switches are effectively 'generic' and will be available from any auto parts shop and possibly even an electronics shop.
See if you can easily pull off the wire connectors and simply take it to the shop. With luck it won't be difficult. Otherwise, may have to wait for a guru to help.
Luck,
Col.
Thanks col, got a mulimeter after work today just have to get off my lazy ass check it all out
Sent from my SM-G900I using Tapatalk
have you got an electronic brake controller - for towing...............??
check the wiring on that as well if you do
No electronic braking system, but i did bottom out in some ruts a little back and hit trailer plug
Sent from my SM-G900I using Tapatalk
To be the trailer plug it will usually be a short and that normally blows a fuse... def worth checking either wayQuote:
Originally Posted by damian.thomas
I have the same problem as Damien. I have '04 GU IV DX. Really useful info.
Andrew