Hi all I have most on the gauges wired in my 3 gauge pod ,but its lacking IMO a USB port
to power things like my DVR, or GPS, seems better than having leads running every which way.
I dont have much room so it would need to be a single outlet
Printable View
Hi all I have most on the gauges wired in my 3 gauge pod ,but its lacking IMO a USB port
to power things like my DVR, or GPS, seems better than having leads running every which way.
I dont have much room so it would need to be a single outlet
Maybe try eBay?
>>>tappin from tassie
Was hoping someone may have comeQuote:
Originally Posted by taslucas
across one already and could share a link
http://www.ebay.com.au/itm/131682208...%3AMEBIDX%3AIT
Found this one I'm going to trim it up and hot glue it in between
the clock and the RH gauge
Won't the guts from one of these fit?
http://www.nissanpatrol.com.au/forum...016/03/154.jpg
Saw them and dont have 35mm spare
its to fit between the clock and the Water temp gauge
Save yourself the pain and just use a usb adaptor plug and stick it in the accessories plug
yeah would be a lot easier, Ill wait and see.
cant put it in the second glove box a it wont close
and just look all wrong.
http://www.ebay.com.au/itm/351454052...%3AMEBIDX%3AIT
Found this stand alone USB port might look OK under the pillar pod, same as your link
but it has a base
Why not use a USB extension cord and just cut out the area needed to poke it through the pod and glue it in flush and then plug the other end in under the dash in one of the USB plugs you have already shown.
So you made one then? Where's the pix?Quote:
Originally Posted by threedogs
Neither of the links you have posted have any Output info mate. I would not go near them.
If your happy to crack a casing then buy something with some specs and make it fit. It's only plastic mate.
I'd get something like this
http://www.ebay.com.au/itm/30cm-USB-...IAAOxyhS9TgAs-
And mount a dual USB under the dash and cut a small hole in the pod face to fit the female end of the cord and glue from the back so its flush and throw in a led in the pod and it will be back lit also :driving2:
I might even do in later I just need to think of a reason for more usb plugs.
Damn you 3d giving me more ideas
@ Mega texture the reason was I didnt want USB cables going everywhere running things like the DVR.
http://www.ebay.com.au/itm/351454052...%3AMEBIDX%3AIT
Ive brought this one and it will sit in the lower right hand corner of the windscreen,
then I can run the USB ext cord under the dash mat keeping it all neat, well thats the plan
My standard GPS screen fitted when new went on the blink and as I had GPS on my head unit I had the dodgy GPS took out and had metal plate fitted that's got 4 usb ports and the light switches for my front and rear light bars, looks great and should never need any more than 4 usb ports!
Thanks Tony I ended up fitting this one it did have stats
Hi Darren came across this one which also has a volt meter in it [red led].Quote:
Originally Posted by MudRunnerTD
as well,,,, you're after a higher amp unit aren't you this one says 4.2a.is that combined as 2.1a + 2.1a
I'm fitting it to either the inside of the lower pillar pod or maybe the LH pillar moulding if there is
enough room behind it.Red led is in the window when powered up eg 12.35v
Still trying to find that other gear for you to, Ill find it over the weekend for sure
Heres a pic of the voltage display on my dual USB port
TD, I recently bought a double USB port for the wagon and stuck it under the up / down switch for the radio aerial, as the blank cover was missing and thought it would be good to fill the hole. I wired it up to the deep cycle battery.Quote:
Originally Posted by threedogs
Good spot down there I have one there as wellQuote:
Originally Posted by Bush Ranger
I wired mine so it was "hot" all the time off my aux battery
I was thinking of putting a switch near the fuse that`s inside the engine bay, so I could turn the USB on and off, but it means that I need to open the bonnet though. But only a thought.
Its ok to run it hot from the Aux battery Ive done that with heaps of different devices over the yearsQuote:
Originally Posted by Bush Ranger
switching it on and off would to me be a pain in the butt