Remote entry

I'm looking at installing a keyless entry kit.

I've got a series 1 GU with central locking, but no remote.

Will this work.
http://www.ebay.com.au/itm/291425777...%3AMEBIDX%3AIT

Will I need to get anything else.

Do I wire it up from the smart entrance module.

Thanks in advance.

i think i'd go to j car and talk to them
no instructions of instalation on that one so can't tell what is needed

I reckon you'll need an actuator for the drivers door mate. But that should be all you need.

Thanks fellas.
Might call into Jaycar on my next day off and see what they got.

How did you go at jay car? Wouldn't mind doing this on mine.

Any luck with jay car?

I am watching this thread with interest as my remote has ceased functioning.

Sorry guys. Haven't done anything about it.

The one you posted Jay see will do the job and as Winnie said you will definitely need a driver's door master actuator. I bought my kit off ebay and a cheap actuator which clapped out, so went into jaycar and got another actuator. Has worked flawless ever since.

Sent from my SM-G925I using Tapatalk

If his Patrol already has central locking I wouldn't think he would need an actuator as it would already be there.

Quote:

---

Originally Posted by TPC

If his Patrol already has central locking I wouldn't think he would need an actuator as it would already be there.

---

I have central locking. So I need a actuator?

Sent from my A1601 using Tapatalk

I did the same thing to a Prado that already had central locking and all I needed was the keyless entry kit. If you didn't have central locking you would need the actuator.

Does anyone have an example of a hit to use or instructions for installation on a patrol. Very interested in doing this one to my gu1