Tb42 pts on carby model.

Printable View

13th January 2016, 09:15 PM
Pezzer

Tb42 pts on carby model.

Hi can anyone help with the location of the TPS for the auto trams on the Tb42 carby.....cheers
14th January 2016, 07:15 AM
taslucas

http://www.nissanpatrol.com.au/forum...016/01/163.jpg

tappin from tassie
14th January 2016, 07:17 AM
taslucas

At the front of the carby, lower down. (this picture went sideways)

tappin from tassie
14th January 2016, 08:00 AM
jff45

Can we assume the plug with the rubber boot elbow is the TPS signal and the other half-white/half-black plug is for the throttle open/throttle closed signal?
Cheers
14th January 2016, 08:30 AM
taslucas

No idea! Lol. The tps is the black box with the rubber elbow boot.

>>>tappin from tassie
11th February 2016, 07:13 PM
Pezzer

Hi Taslucas the plug going into the Tps how many wires and could you give me the wire colours please.
Regards Pezzer....
11th February 2016, 08:15 PM
taslucas

I'll have a closer look in the morning mate, getting dark now

>>>tappin from tassie
13th February 2016, 01:10 PM
Pezzer

Hi how did you go?....so close now...lol
13th February 2016, 02:33 PM
threedogs

Quote:

Originally Posted by taslucas

At the front of the carby, lower down. (this picture went sideways)

tappin from tassie

Was yours once a dual fuel set up Lucas
13th February 2016, 02:45 PM
taslucas

Quote:

Originally Posted by Pezzer

Hi how did you go?....so close now...lol

Oops I forgot! Going out now...

>>>tappin from tassie
13th February 2016, 02:59 PM
taslucas

How's this?http://www.nissanpatrol.com.au/forum...016/02/139.jpg http://www.nissanpatrol.com.au/forum...016/02/140.jpg

>>>tappin from tassie
13th February 2016, 03:01 PM
taslucas

Quote:

Originally Posted by threedogs

Was yours once a dual fuel set up Lucas

Yep

>>>tappin from tassie
13th February 2016, 05:47 PM
Pezzer

Thanks heaps.......
13th February 2016, 07:29 PM
taslucas

Quote:

Originally Posted by Pezzer

Thanks heaps.......

No worries mate, hope it helps

>>>tappin from tassie
18th February 2016, 08:22 AM
jff45

I'm trying to help Perry sort out his TPS issue with his mix of TD42 TPS and TB42 loom.

Taslucas, any chance you could take a voltage reading from the 3 wires you've shown there where you have a yellow, yellow/red stripe & yellow/blue stripe.
I think the yellow wire should have around 5v
Thanks
18th February 2016, 10:03 AM
taslucas

Quote:

Originally Posted by jff45

I'm trying to help Perry sort out his TPS issue with his mix of TD42 TPS and TB42 loom.

Taslucas, any chance you could take a voltage reading from the 3 wires you've shown there where you have a yellow, yellow/red stripe & yellow/blue stripe.
I think the yellow wire should have around 5v
Thanks

Me and electronics don't mix haha. Also I don't have a multi meter... I'll see what I can do

>>>tappin from tassie
18th February 2016, 10:38 AM
jff45

Ok, no worries, don't risk blowing anything..
18th February 2016, 11:55 AM
taslucas

I could probably test it with my tongue?

>>>tappin from tassie
24th February 2016, 12:40 PM
Pezzer

Thanks i have a fully converted td42t now but it wont select the the gears in the auto, i cannot five the elusive 5v that jff45 wants me to find. so annoying i want to drive the beast...
24th February 2016, 02:55 PM
taslucas

Hmm... Without the input from the tps it should still change up gears when in drive.

So yours won't select a gear at all?

>>>tappin from tassie