Hi guys, I am after a cargo barrier for the gq,
Apparently a gu one will fit so if you have one please let me know. Located Brisbane/ Ipswich area but will travel.
Thanks Rob
Printable View
Hi guys, I am after a cargo barrier for the gq,
Apparently a gu one will fit so if you have one please let me know. Located Brisbane/ Ipswich area but will travel.
Thanks Rob
Bumped , measure it up as most might fit just different brackets used
Can you weld? I made mine for about 100-120 bucks
If you get no joy here for the sake of little effort try and find a gq one on eBay.
Gumtree as well and even message the blokes wrecking gq's.
Have your saved search and check daily.
One sold in vic the other day for $150 in good nick.
Only if your in no rush as it can take months.
The GU ones definitely fit, got one in the back of mine, just had to fart around with the brackets a wee bit to get them to fit where I wanted. Bit of drilling, bit of straightening, bit of bending...............
Try around some of the car hire places, they maybe getting rid of their fleet cars, so sometimes they pull the accessories out such as barriers, canvas seat covers etc, and sell them off cheap. Got mine from AVIS for $30 in very good condition over a year ago (advertised on Gumtree). They're out there, just gotta be quick.
Sean scored a gu one to fit into his gq almost new for less than $20 at a swap meet.. he will be happy to hear they fit.
ebay and gumtree, nothing, 4x4 swap trade sell (facebook) nothing, at least 10 wreckers nothing,
Yes I can and I think I might have to! Any chance you can post a couple of pics so I can steel your idea's LOLQuote:
Originally Posted by megatexture
Have seen an early model crummydoor one used to. Looked pretty good
If you wanna weld a simple 25x25x2.5 shs and mesh.
If you do a full run a bar across the middle where you bend to follow the seats..
Yep not a problem I'll gram some tonight for you, I did go a bit overboard on mine though lolQuote:
Originally Posted by 89gqpatrol4x4
Hopefully you can see enough, as you can see I've got a few bracing bars, possibly more than needed lol
Also I accidentally put the mesh against the seats when I think it would be best putting the mesh inside the boot area
Looks good mega! Thanks heaps for the pictures.
Depends how fussy you are (or how poor), but theirs a few other barriers that'll fit. Little or no work to fit them too. Mines a Magna one. Its a little low at the top, but that suits the fishing rods. Cost 20 bucks. EL wagon, and Commy wagon also easy fit.
Mark
I have a ef /el fitted to min gq - with sitting on the ground I have around 10 CM at the top clear - hand for the long fishing rods.
IIt was simple to fit used a couple of small bits of angle to mount it to the side of the wheel arches
What model Magna and Commodore models fit without too much modification?Quote:
Originally Posted by no eye deer
Anyone know????Quote:
Originally Posted by clubbyr8
No idea mate..... Might be best to measure some up but I'd have to assume moat would fit with a bit of fettlingQuote:
Originally Posted by clubbyr8