Printable View
G'day folks. Have been busy savin up some dough for my next mod. First off was the winch bar for my highmount now this what do you think. I have been doin some testing to see if I can improve airflow. I also ended up with this box of shiat to help things along.
scoop is the wrong way round
it pushes air onto intercooler
Looks like you've tested it with a reversed scoop.
Any comments of your findings.
Yeah no harm done it will let the heat out but you need it facing forward so air is forced onto your inter cooler
as long as it works it's all good!
The reason for testing the scoop is I no longer have an air to air intercooler but have gone for this.
Now it all makes sense. LolQuote:
Originally Posted by Gary Vansleve
What motor do you have??Quote:
Originally Posted by Gary Vansleve
I looked at this and thought, he's taking the pi55 out of us. Was waiting for the replies, you'll get some interesting looks.Quote:
Originally Posted by Gary Vansleve
How can you not recognise the legend that is a TD42TiQuote:
Originally Posted by threedogs
coz he's a zd30 fiend!!!!!! lolQuote:
Originally Posted by nissannewby
Oh allright ya got got me . Thought I would start this arse about face but throw in the "been savin up some dough" bit to see what replies I would get. Told ya a while ago in previous posts Iam a cunning little crunt sometimes ha ha . All good a bit of variety spices up things sometimes.Quote:
Originally Posted by Apollofish
After much toin an frowin decided to go down the path of water to air. It was a toss up between ARE and Mehl Brothers Performance both up in Brisvagas. At the time of lookin ARE were having some issues with their core supplier and at that time were not sellin their set up so off I went to Mehl Bros and they got the nod.
They supplied and fitted the w/a intercooler, inlet manifold ,oil cooler, piping kit from air cleaner to turbo and tune. The tune included time on dyno,valves and injector service. Of couse the complete EGR system was removed. Now I can get at the oil filters a lot easier. This was the main reason I went for this set up just kiddin ha ha .
So as per original post I am in the process of sussin out the original scoop to see if I can get better airflow ala A9X Torana and Chevy camaro.
could put a few washers on the bonnet hinges to lift the back of the bonneta few mill this will help lots
Quote:
Originally Posted by Gary Vansleve
G'day Gary
mate sounds like an awsome setup, just wonderin how its going. any issues pop up since the install. How was it dealing with Mehl Bros. Was the pricing ok. not sure who to go with between On and off Road Brendale and Mehl Bros Northside for my bog stock 4.2 which i love but recon it needs a little hurry along.
cheers mate
Mehl brothers have a dyno. On and offroad dont.
ah, thought as much. cheers
Had another chat with Mehl bros, really impressed me in general ... now which stage to get???
G'day mate
Have had no issues with the set up and was quite happy dealing with em.
Cheers
Gary