Printable View
Hi all
Wondering if anyone knows how to remove the door outer weather strips, the ones that sit on the external side of the door. I'll post a pic in a second to show what I mean just in case.
Cheers
Andy
http://img.photobucket.com/albums/v9...B09CC0CB20.jpg
yeah you need to remove the inner door card, remove the inner weather strip the you can see the clips through the window glass. wind down the window and you should be able to see what you are doing and get access to them
Thanks MR. Is the small window on the left easily removed also?
fairly, what are you taking it out for? bit of a bitch but the outer is one piece, once you have the inner out you will be able to see OK/ are you trying to take that small glass out?
In the process of painting the rest of the troll. Would prefer as little masking as possible but if it's a pain I'll just have to do my best with masking it off.
Cheers
Mask that one off mate, you will get the outer off easy but you will have to take the main glass out to take the separator out to then remove the small glass. mask up i reckon. Your paint looks great in that pic! wish mine was that nice!
Paint is in ok condition, there's just a lot of scratches and crazing in other sections. But it's condition means I don't have to go down to bare metal.
Andy,
I havent seen the panel beaters do this with the weather strips, as they normally remove them, but you could try some small diameter rope and lift to insert the rope so that it sits under and behind the edge of the strip so it lifts it away from the paint line, then mask up the rubber as normal.
If you do this, make sure it is really clean underneath, as you dont want to blow dirt through your paint.
Mic
Managed to remove the strips fairly easily. Just involved removing the door card and using a a flat head screw driver on the aft two weather strip clips. Once these were free I could basically work the rest of the clips loose and lift it off. Easy!
Thanks all for your contributions!:)
http://img.photobucket.com/albums/v9...DC7A632CB9.jpg
Mate you know whats better than that? Bread and butter knifes , the old school ones. I use them for pulling interiors apart, lcd screens . Another trick for removing winding window hands is to fold your shirt in half slide it under the handle and pull it side to side.Quote:
Originally Posted by Parksy
http://www.nissanpatrol.com.au/forum...2014/04/24.jpg
Anyone know a good source for new weatherstrips, mine are looking pretty sad.