Printable View
So my issue is I have no rear drive light on passenger side. I have brake light but no drive light they use the same globe wires are fine fuses are fine from what I can tell. Im not sure how or where to start on rectifying the problem any help much appreciated cheers
Have a look at the light itself..
Mine use to snap or get rock hits at the housing itself..
There solid mate no cracks hits etc. There Patroldocta ones im not sure if it could be the holder for the globe thats faulty cheers
I've also had some issues with corrosion inside the globe holders..
Play hell with the globes. I found a dremel sanding barrel fits perfectly down it..
They certainly are cheap looking holders guess ill have to crack it open as they look clean cheersQuote:
Originally Posted by Westy's Accessories
They should just unscrew from the housing.
sorry I was talking the globe holder yeah that twists out but im thinking now the wire is not contacting the globe
All is clean
Front left headlight is blown could this be causing the issue
Does anyone know what power should be at brake and driving light?
Is it just one side not working?
Yeah mate just passenger side brake works fine just no red when headlights are on
If you still have OE globes you'll find over the years the lead on the base of globe will wear away.
sometimes if you hit the lens it will come good, but a sign all globes may need changing if the same age.
Something a lot of ppl forget to do
All sorted the solder on the connection was preventing the power to flow through
I have a very similar problem to this, but my indicator and rear light isn't working. Brake light is fine. Where abouts did you find the solder connection? My globe holders look fairly well sealed up.. the wire disappears into the plastic and I can't see anything from there.
i had thne issue of none working taillights once and as i searched it was the wiring from under the seat to the lights