Printable View
I've been doing my nads setup and thought I would just tap the exhaust to install the egt probe. But to my luck Ive had a bit of a mess up and now need to get the bung welded in.
Is there anyone that is or knows of a mobile welder that can do this for me today or tomorrow?
Perth, south of the river
I have cash!
Regards
Shaun
I'm on phone so can't see location if you have it. Throw up your location in that post mate.
Sent from my iPhone using Motorculture mobile app
Perth it says on his profileQuote:
Originally Posted by AB
Got sick of Motorculture so gone back to Tappa
Instead of welder try a Gas torch and silver solder bung on or braze
what ever tickles your fancy
I know a couple of welders but they don't have mobile equipment. Google "mobile welders Perth" there's a few that come up
Silver solder? What is this?Quote:
Originally Posted by threedogs
I rang 3 local to me but they all rang out :(Quote:
Originally Posted by Clunk
Well someone rang me back. Gonna cost and arm and leg to get a small weld but it needs to be done.
yep, thats the trouble with trying to get something done on the weekend
Stick welding with a flame using either 2% or 15 % silver solder
But for the Bung I think the neatest way would be to get it TIG welded in
Someone just had it done for $40 from memory. Think that's your best Bet
Gonna cost me 4 time that to have it done at home on a sunday
That's robbery hold off till you suss something cheaper IMO
$160 for 5 mins work nah
EDIT:: it was a 4x4 shop the tig welded it up for him
I know it is but I don't have another car and can't really drive it with a big hole in right in the engine bay.
Plus if I don't go to work Monday ill lose a lot more then $160
Shaun,
For another option, with a bit more work on your behalf, will it be cheaper to remove your dump pipe and take it to someone....
Mic
That was my first thought. But for some reason who ever had the exhaust put on the car has had the dump pipe welders to the exhaust system. So I would have to remove half my exhaustQuote:
Originally Posted by happygtu
I could pop over. I think travel would kill you but.. Lol
A hole in the exhaust for a week will do no harm. As a boilermaker for a small fiddely job you can expect 60 to 100 an hr plus consumables minimum 4 hr charge plus Saturday 1.5x rate and Sunday 2 x rate.
The dump pipe should start at the back of the Turbo, and finish just around the cross-member for the gearbox, and be easy to be unbolted.....Quote:
Originally Posted by Shaun 4x4
It won't hurt driving with a hole, as Macca pointed out, but it will sound strange, and if you are going to drive it, just put a metal shield in front of the stuff directly opposite the hole, and that will protect it from any heat damage.
Mic
$160 is cheap then...... I thought so to, as it always takes slightly longer than you think as everything is that little bit harder on the vehicleQuote:
Originally Posted by macca86
Mic
I would have thought for $160 there abouts you could get your own little home level MIG welder. I would lend you mine but I doubt you will appreciate the freight costs.
In general I thought, wrongly it seems anyone wanting to do their own mods would at least have a welder or a gas system.
Old age showing through.
Cheers for the replays guy. Especially you guy offering to come from over east. Lol
Yer I've never needed a welder until today. Plus Ive never welded before. Lol
I agree with macca mate, if you can get away with not driving the car tomorrow and first thing Monday drive straight to a shop and get it done.Quote:
Originally Posted by macca86
providing the hole isn't directly pointing towards anything of course.
When I did my turbo I drove around for about 20 minutes with just the dump pipe pointing downwards, no connection to exhaust to try out the new turbo and all was well.
Sounded like a beast too...lol
I bet it did. I remember taking the exhaust pipes of my VZ maloo for some loud fun.Quote:
Originally Posted by AB
I would like to take it in Monday but I have work. Won't be free again till next Saturday.
Don't wont to drive the car all week with a hole in the pipe
It isn't the worst thing in the world, and at $160 it won't break the bank....Quote:
Originally Posted by Shaun 4x4
You'll be all fixed in no time at all, and hopefully you can forget all about it after that.
Mic
This is true.Quote:
Originally Posted by happygtu
Ill just bee happy to see my new gauges all working properly :)
I did the same thing when I tried to tap the EGT sender in. I put a stainless hose clamp around the hole and drove it to the local exhaust shop first thing on the Monday morning. He welded the bung on in about 20mins, charged me $40, I threw the heat shield back on and I got to work only slightly late.
Well it's all done now. Bit pricey but I am happy with the job and now I can finish my install :)
You're the only one it needs to please, so now its all done.
ONE LESS THING
Yep, fair call mate, job done, no stress...Quote:
Originally Posted by Shaun 4x4
Good stuff Shaun,
Great to hear it is all OK in the end
Mic
Good to hear mate.. How much is a bit pricy??
Cheers guys. Was $180
:o dam things are expensive your way...Quote:
Originally Posted by Shaun 4x4