Printable View
Not what you think ya dirty buggers. ..
Been slowly building my own draws as the first ones I did were crap and after a couple of tough trips started to fall apart.
This time I have built in a 12v compressor and tank plus some other goodies.
More to go but hope to have it all fitted by the end of the week.
Must thank 04off and Rodney for advice.
Attachment 29692
Attachment 29693
Attachment 29694
Attachment 29695
Attachment 29696
Chit.......
Wooden reg grundies, I get it. RLMAOL
Shite the stuff you come up with, gold absolute Gold
Now working on the wiring that goes into the top box .... hard when kids are driving you nuts and apparently it is your turn to cook...? bugger.
Mark I know where you live mate.
16mm ply... :eek:
It'll weight a ton..
12 is way enough for a simple draw system, but yea, a bit late now..
Looks good though.. check the sound levels before you install, if its loud out of the car, it'll be a PITA once in an enclosed area.. but plenty of options to reduce unwanted noise..
Kallen Westbrook
Owner of
Westy's Accessories
Only part of it is the thicker ply for the top that will have the fridge on it and the base.. the rest is much thinner.
As for the noise from the compressor I had a 240v one in there before and only used it for airing up or cleaning filters and my gardening gear.
You don't now. I shifted this week. Muwahahaha!!! I know where you live though...Quote:
Originally Posted by Bloodyaussie
Looking good cuddles:)
Now get inside and COOK!
Looking neat so far mate, I like it!
This looks awesome would love to see this in the car when done give me a few ideas for myself.
Great job mate !! congratulations
Best regards
Petit caillou.
looking good
Thought you would be good with some wood cuddles
Last night I finally got the bugger in with help from across the road.
Fine tune a couple of kinks and only a few more mods to do but that can be for later.
Just need to find a new cover in grey for my engel??
Stupid motorculture wont let me upload pics
What size fridge?Quote:
Originally Posted by Bloodyaussie
Not sure... it is an old fridge?
Attachment 29768
Drawers look lovely jubbly..... now make some for me?
Of course I will will for you sweety....But only if you can get Growler to eat 2 chilis in a row!!!!!! he he!!!
Looking good BA. What's with the mesh on the windows..... anti smash & grab ....... a neccessity up there in the BigSmoke?
Cuppa
Nah I normally have my dogs in the back and need to have the windows open so the cage stops them from jumping out!!!
You need bigger dogs that can't fit through windows........ & that doesn't mean you should feed your two more! LOL
Cuppa
Looks good Jonathan. Got any pics of the inside of the top drawer mate?
Ps. Do you want me to fix the title? Driving me nuts ;)
Looks great BA, I am way too lazy to do that myself.
Well done, great set up