Engine fan part number? petrol 4.2 GQ

guys sorry if this is somewhere else,i tried searching and came up with nothing.
I have a 94 GQ petrol efi 4.2 and found the fan starting to crack, so today i ordered in a new fan but it wont fit my clutch part? too small on the internal diameter, sent it back and got another that was exactly the same too small. I was going to be using the truck over easter but wont be if i cant get the right part.

Does any one have a part number for a new fan (just the plastic bit!)? are they readily available through bursons or repco?

cheers guys.
If there is an answer here feel free to point me in the threads direction!

21486 I believe is Nissan's oem part number

Not sure on there availability through bursons or repco but dare say you would have 2 order it in

http://nissan-europe.epc-data.com/pa...ing/214/21486/

Is yours an auto or manual???

mines auto, might have to try the local nissan dealer then...

I was going by the Nissan Fast software with my VIN# which is a 92 GQ auto so should be the same, not sure if there is a difference between auto / manual, pretty sure diesels are different.

Hope that part number helps

cheers for the help, hopefully i can get it sorted this week!

Give Garry at Nizzbits a call, should be able to assist you mate

thanks guys, got it sussed now i think! our first parts supplier only listed the one fan for the gq 4.2 petrol engines, it is 133/134mm across the center bolt holes which was too small to bolt to my clutch section of the unit. everything else of this fan was right.
our second parts supplier lists 2 different fans one that is for carby engines and measures 133/134mm across the bolt holes, and then one for the EFI engines which is 143/144mm across the bolt holes. (again this fan is a seven blade, same outside diameter)
should have it in my grubby hands tomorrow morning!
thanks again for the help

Good to know Carby and EFI are different.

Thanks for updating the thread :)

Quote:

---

Originally Posted by mrflibbles

thanks guys, got it sussed now i think! our first parts supplier only listed the one fan for the gq 4.2 petrol engines, it is 133/134mm across the center bolt holes which was too small to bolt to my clutch section of the unit. everything else of this fan was right.
our second parts supplier lists 2 different fans one that is for carby engines and measures 133/134mm across the bolt holes, and then one for the EFI engines which is 143/144mm across the bolt holes. (again this fan is a seven blade, same outside diameter)
should have it in my grubby hands tomorrow morning!
thanks again for the help

---

Interesting .............
Thought the only differences in the 4.2 L were the diesel and the petrol
To my knowledge when ordering you order what the engine is, not wether its carb or injected ...
Some parts suppliers don't know anymore than whats on the box

some part suppliers are hopeless!
the guy i spoke to asked all the questions about the GQ, petrol or diesel, auto or manual carby or efi, etc etc the other mob only wanted to know if it was petrol or diesel.
hopefully it is right, from all the measurements it seems to be correct, but wont know 100% till tomorrow.
Im happy to post what i do and if it works (or doesnt!). It might help some one else out!