My GU

I've had it for 2 months now and added about 8000k to the clock already.

Apart from towing my camper for a bit over the holidays up the east coast and around SA I've managed to get out on plenty of tracks.

I'm lucky enough to be in Vic and surrounded by some very good ranges. Mt Cole, Grampians and the Pyrenees are all under half hr away.

As it already has a B Bar and winch my only mods planned are 285's and a small lift.

At the moment I'm looking at a light roof rack suitable for my kayak and small stuff.

Attachment 25065
Today next to lake belfield, grampians

Attachment 25066
This morning in Langi Ghiran

Attachment 25067
On the beach near Port Macdonnell

Attachment 25068
Mt Cole

Attachment 25069
Pyrenees

Attachment 25070

Thats a good looking unit mate. Small lift and tyres for now ay? hahahahahahahahaha good luck with that the mod bug WILL bite :)

X 2 yeah right small lift and 285'S lol We certainly are blessed in Victoria with all the different types of terrain available
And a locker and an awning and some side steps and some Dyneema rope and some Oh sorry you just said small lift and 285's
didn't you.?????????????????????????????????????????????? ??

Great rig, great photos, great destinations.

Got a pair of these to replace the crappy driving lights.

Attachment 25684

G'evening mate,

All the best with your Patrol!

Regards,

RLI

Have certainly heard there is some super 4x4 in victoria. One of the guys from work goes down that way all the time. Thats a nice looking rig, thinging of doing the same as you but dont think I will be able to stop there. All the best

Went to halls gap today, took the scenic route home

Attachment 25804

looks good mate

Nice mate.. great photos. Enjoy :)

Scotty

...looks like a great place, gotta get down there some day.

After doing lots of looking at recovery points I measured everything up and did a template.

Attachment 27914

A few adjustments to my drawing and I ended up with this.

Attachment 27915

All done and painted.
I used 8mm bis80 plate and when inbolting the bull bar it sprung out a perfect amount for it to slip behind.

5 bolts will hold it in place
Attachment 27916

Hopefully it's not hanging down too far.

If it proves to be a problem ill make a new one with the tow point at the front of the bracket

Attachment 27917
Attachment 27918

yep once you start theres no stopping just whats next

Been doing nothing but driving it lately. At least once a week I've been taking it bush
Attachment 31420
Today in Pyrenees
Attachment 31421

Attachment 31422
Grampians yesterday
Attachment 31425

Attachment 31432
And mt cole day before
Attachment 31433