Hey guys.
I got sick of not having enough storage room in my patrol so i built this
Printable View
Hey guys.
I got sick of not having enough storage room in my patrol so i built this
Well done bro.
I'll have a good look when I come out of 'the Naughty Corner' (dial-up). lol
Take care out there.
Ross
DX grunt
Great job mate do you have any on the go shots? do you have any measurements?
Thanks for the pics, great work
Looks great mate, well donehttp://www.nissanpatrol.com.au/forums/
will take some measurements when i pull it back out to add power points and liningQuote:
Originally Posted by Russell1974
unreal nearly game to get the jigsaw out now. Top job neat
Nice, wish I could do the same butit would just turn into another place for the kids to put their crap...
yeah know how u feel that's why i put the lock on itQuote:
Originally Posted by Tracy
Been wanting to do this for quite a while myself.
Mate, I have been wanting and planning this for ages. I have even drawn up a 3D digital model of the whole thing using SketchUp 7. If only I could find the time to get the job done! Here is a jpg. image of the model.
:cheers:
Shayne
(im2xtreem)
looks good Shayne, only change i would make is to put a top in it to stop stuff bouncing out. Which it did on my 1st attempt
neat job mate, no passenger airbag in that model then?
Nice one mate, hadn't thought of that! Lol Will have to do that. I was planning on fitting a light in it anyway so that will give me a location to mount it. I'm also going to wire up a lighter plug in the dish section to power stuff like laptop, charge phone and batteries, etc. Should make life much easier and the cabin cleaner!Quote:
Originally Posted by 71mud
:cheers:
Shayne
Been gunna start mine, but can't work out how to get the front panel off, does it just pull off or is there something holding it on?? yeah, I know, dumb arze eh?Quote:
Originally Posted by 71mud
You need to take the main glovebox out & then reach up with a short phillips head screwdriver to remove 8 screws. 4 at the top of the panel & 4 at the bottom, then saw out the backing & start building. If you need pointers try out this site grungles.com.au It is a personal site of a mate showing all his mods in detail.
Thankyou Kelvin, as soon as I get back from NZ, I'll give it a bash, I wondered what held it all in place, cheers.