Printable View
G'day,
Wasn't quite sure where to post this one.....
Am looking at roof racks etc at the moment and I'm quite keen on the Rhino pioneer platform tray. Only problem is they don't have an official listing for an appropriate GQ version, only the GU. I already have a set of HD Rhino bars which is why the roof platform appeals so much.
Does anyone have any thoughts and or suggestions? Experience with the pioneer trays etc?
Cheers,
Drew.
It should be ok but to be sure, you should contact your local rhino rack distributor. You may also need an extra bar or 2 if you only have 2 bars already, depending on what loads your gonna be putting up there.
Don't stroke it, TAP it!!!!.....
Thanks mate. I've been to see one of the main Rhino disty's here about awnings and was horribly disappointed with their knowledge.
Hopefully will be better with racks...
Cheers,
Drew
Sent from my iPhone using Tapatalk
With out jumping on the lappy to take a look, I think the actual platform is the same size no matter what car it's going on..........
Don't stroke it, TAP it!!!!.....
Spot on Clunk. And the platform legs are adjustable.Quote:
Originally Posted by Clunk
Aren't the platform legs and the legs on my Rhino bars one in the same?
Sent from my iPhone using Tapatalk
Think you just attach the platform directly to your existing bars
Don't stroke it, TAP it!!!!.....
I've made my Rhino platform tray work.
As mentioned size wont really matter as long as the roof racks are wide enough. Then there a brackets to suit. Auto Barn are Rhino Distributors
http://i223.photobucket.com/albums/d...ps7a0857bb.jpg
http://i223.photobucket.com/albums/d...ps8658b11e.jpg
I have Rhino U-bolt clamps to lock it down once i way made the main cross member bar.... Just always remember the load capacity
Quote:
Originally Posted by Drewboyaus
The legs are the same but different bars are used. Six legs per platform (8 can be fitted). I've moved the platform forward and added a single HD bar, so more storage with rtt fitted. I had to add 10mm spacers to the bar so everything was lined up. The GU has a slightly curved gutter toward the front and a couple of spaces on the front legs are also needed.Quote:
Originally Posted by Clunk
Attachment 23361 Attachment 23362
Better than a thousand words.
Great pics thanks.
My guess is that as long as the tray width works with the GQ's roof (somebody recently suggested the Troopy one might fit better) then it should be all good.
Can I ask what size you got and how much it was?
Cheers,
Drew.
Sent from my iPhone using Tapatalk
I got a 42014. Also got the hoop and rail option. Prices in links. You have to buy the legs separately. You can also fit a platform to existing Rhino HD bars.
I'm just about to embark on the same path.
Going to be using the Rhino aero bar X 3 and build a custom low profile roof platform.
It'll have brackets for awning , lightbar and rear light bars welded on, I'll be doing a bit via the DIY section.
Probably very early next year now.
When you say build, are you welding it up yourself?
Sent from my iPhone using Tapatalk
I switch my Rhino racks between the 2 vehicles (GU to GQ), you do need a spacer & longer bolts for the very front bar for the GU