hi there guys dave here not sure how to use this yet as a beginner but ill get there so hi to all.
i have a question about the scan tool for the zd30 does any one know of one n the rough price thanks
Printable View
hi there guys dave here not sure how to use this yet as a beginner but ill get there so hi to all.
i have a question about the scan tool for the zd30 does any one know of one n the rough price thanks
Hey Dave,
ZD30 is not my thing mate but a quick search i got this thread for you
http://www.nissanpatrol.com.au/forum...his-scan-guage
If you are running a CRD motor then the ScanGauge 2 is an option.
I just bought one from here
http://ample-outdoors.com.au/store/
They are around $170.
I am a long way from understanding the majority of its features but am enjoying learning!
Gooday RooGU.
As DSzuke has said,this only works on the CRD motor. For DI motors try this instead; http://www.ecutalk.com/
Cheers
thanks guys for the info itl give me somthing to keep me busy while i look into them
If you have a CRD check out Ultragauge it's made by the parent company of the scangauge. Cheaper and more user friendly than the scan gauges.
Ultragauge web site
http://www.ultra-gauge.com/ultragauge/index.htm
not much luck guys they all seem to be for crd not did any ideas
01 Roo, ecutalk works on DI engines.
thanks mate ill check it out
Mine cost about $8k and it definatley does the ZD30DDTi. Im not sure on the cheapies sorry mate :(
have a hunt on utube and it will show you how to set up and use
:hijacked:Quote:
Originally Posted by 01 Roo Gu
Contact Peter at peter@ecutalk.com.au I'm sure he'll sort you out .Di only
Price wise about $250 new I think, I brought mine from a forum member for $145
Best thing ever, still freaks me out when the buzzer goes off at 115kph, but I'll leave it at that
Just plug it in it will show most motor functions first up
I have purchased a USB device from ECU talk, this shows the ECU data and allows the deletion of fault codes. Cost me about $100, or so. It has a bit of software and the USB connector. It also has the OB2 test connector for the plug under the dash.
I bought the kit for the 2000 patrol ZD30 system. Apparently mine is pre OBD2. I haven told it is OBD1, but different people offer different advice.
Nevertheless it works well, showing all the sensors and readings on a screen of gauges. Pretty darn good really.
My tech savvy son loaded it on my lap top, for me. It was a bit tricky to load up myself, anyway.
Have a look at www.ecutalk.com/interface.aspx. I also emailed nissandatascan@yahoo.com. For advice on my particular needs.
Hope it is of some use to you
Philb
This thread has been moved under the category: Mechanical - Auto Electrical - On-Board Diagnostics
Cheers
Toddie