My rear door is pretty damn squeaky! I think its just the locator thats the main problem.
Any easy fixes I should know about? :icon_bonk:
Printable View
My rear door is pretty damn squeaky! I think its just the locator thats the main problem.
Any easy fixes I should know about? :icon_bonk:
tried greasing it up ?
I use White lithium grease spray for all my hinges and locks.
http://www.3inone.com/products/white-lithium-grease/
Cheers guys! I might buy some of that white lithium grease, it'd be handy to have on hand...
X2 - it's good gear ...Quote:
Originally Posted by gec
Is it squeaky due to the weight of the tyre and wheel?? Try throwing some tape (not much, but enough to "tighten" up the locking mechanism as it were) around the top locking bar thingy, and the one on the large barn door also .. I did that, and whilst it wears through after a while, it definitely stops the squeaks ...Quote:
Originally Posted by boosh
Hey Biggus, Try using heatshrink on the locking bar, it lasts for ages.Quote:
Originally Posted by Bigrig
OMG!!! How obvious is that??!! lmaoQuote:
Originally Posted by GUtsy ute
Top tip old mate!!! That's exactly what I'll be doing - only just touched them up again last week!! So next time, heat shrink it is!!
Thanks boss!!
This may be a silly question, but how do you get the heat shrink on there, some pics would be great.Quote:
Originally Posted by GUtsy ute
reviving an old thread here but since taking the spare off the rear door on my 09 GU, thing rattles like crazy. have done the dry lube, normal grease, lithium grease and I forgets what else but no luck.
from what I can gather it the centre latch rubbing against itself (kinky) causing the rattle but no idea on how to get rid of it
Mine squeaks too specially when driving under the rain. I think it is the weatherstrip that is rubbed with the body that produces the annoying sound.
I got a heatshrink from etsa. The bloke just handed me a peice, didn't have to pay for it :DQuote:
Originally Posted by GUtsy ute
The heatshrinks from etsa actually have adhesive in them so even if you have to cut it to get it on there, it'll stick to itself and not shrink away from itself... Works a charm!
Alex, I have the same issue with mine. Do u have any hints for a resolution or are you just grinning and bearing it?
sorry i failed to read this tread again I didn't know you posted a Q on my post. The squeaking was solved by the shrinkable tubes but I removed it lately due to door open light warning. It didn't solved the door light issue so i'll stick some shrinks again, maybe thinner this time.Quote:
Originally Posted by Jamesandlizk
So does the heat shrink help with that noise when you open or close the barn door coz lube didn't help it?
You aren't by any chance suffering from a broken spot weld (usually a crunch when it shuts) this will need some holes and bolts like this :http://www.nissanpatrol.com.au/forum...2013/04/20.jpg
You can also see the lithium grease on the dampening arm. It wouldn't hurt to give the locking arm below a hit with the grease too as pictured here:http://www.nissanpatrol.com.au/forum...2013/04/21.jpg
Also the other end of it.
Good question. My GU8 does the exact same thing, as did my GU2....Quote:
Originally Posted by gec
not exactly the same case, the barn door squeaks only when the truck is running and it rains. the shrink holds the catch tighter. the shrink placed in there wouldn't at all help n the open-close door noise situation. hinges are to be blamed. hope i'm right.Quote:
Originally Posted by Drew
Are the hinges worn, can you lift the door up and feel any play.
Might be as easy as drilling old hinge pin and e=inserting a bigger one..
Keep the dry grease up to it in you maintenance routine,
Hot soapy water to clean all rubbers then Tyre shine all your door rubbers inside and outside.
When I put the heatshrink on mine the light was coming on too. Easy fix for that is just to unscrew the button and put a washer or 2 underneath it. You only need to gain a couple of mm for it to work properly.Quote:
Originally Posted by alexx
Graphite powder is always handy for hinges, etc.