Can any body tell me what size bolt I need for
for the engine mount brackets are they fine
thread or course thanks in advance
its a 3l Di
Printable View
Can any body tell me what size bolt I need for
for the engine mount brackets are they fine
thread or course thanks in advance
its a 3l Di
I wonder if they have the size in the service manual Roofy?
................on the road
Looked in the gregorys manual just says for boltsQuote:
Originally Posted by Nisshead
might be 9/16 ill know better once I get it apart
I just checked the normal manual and they seem to have torque specs but not bolt sizes.Quote:
Originally Posted by Sir Roofy
Bloody hard manuals to navigate..lol
................on the road
I'm sure mudski has some new mounts ... He can check bolt sizes , measure up etc ... Maybe ? @mudski
Sent from my SM-G920I using Tapatalk
Not wrong there we will survive mateQuote:
Originally Posted by Nisshead
Thanks mate have to wait till he's free I guessQuote:
Originally Posted by Hodge
The mounts don't use bolts, they have studs in them. The bracket is bolted to the chassis. I just check the parts catalog and theres no size written. They will be a metric fine thread. Are all the bolts missing? both sides? I think they are a 14mm head on the bolt, which should be a 12mm (1.5 pitch I think) by maybe 20mm in length. If you can get another out you can use this for reference.
11298VB912 for LHS and 11298VB913 for RHS, are the OEM numbers. 4 each you need for both sides. Not sure why they are different part numbers, most times I see this they are the same part, just different numbers. See if a local Nissan dealer ship can get them? They might be cheap enough from them for the right ones.
Thanks mate yea four bracket ones where missing the ones that bolt to the motor
was very lucky the motor didn't twist out
ITS done now I have to wash the blood off the motor and me
hate 3l motors with a vengeance
shouldn't come loose this time used lock tight