I would appreciate anyone with a GU (2002) with a 2 inch lift telling me the distance from the middle of the hub to the bottom of the guard.
Printable View
I would appreciate anyone with a GU (2002) with a 2 inch lift telling me the distance from the middle of the hub to the bottom of the guard.
Give me 10mins mate, I'll go grab a tape from the shed and check Mrs MB's for ya!
580mm rear / 570mm front. (Rear bags currently @ 5psi) Although very heavy WA bar, winch, steps, Titan rear draws, empty Waeco & steel rack to consider mate! Sent from my iPhone using Tapatalk
I appreciate the effort MB.
I am at 560 front and rear...with Titan drawers in the rear.
The current springs and shocks are old with no obvious markings so no idea what they could be.
I am running 265/75/16 tyres.
Sounds like a 2" then which could be sagging a bit with age.Quote:
Originally Posted by Mc4by
Too easy mate!
These were RidePro's from Patrol Apart about 6 months ago. We put my old Koni 88s I think they are in it too.
Does that mean I need new shocks, new springs or both?
Not sure mate, not much of a mechanic me.
560mm doesn't sound too bad, not much in it really. I'd say springs if anything, some good brand shocks can be redone too!
It can wait a little longer given it's only about 20 mm.
Thanks again for taking the time to measure MB.
No probs!
It's realistically probably only 10mm difference between us because our rear bags at 5psi do still push the arse end up that extra 10mm when no trailer is on.