Wiring Fridge,Compressor,Fusebank
Hi All
Im looking at wiring up my GU now that I have my Aux Batt set up, Ive got a few options and not exactly sure what the best way is to go about it, my Autoelec knowledge is minimal to say the most, so thought it would be a better idea to get some feedback from those with more experience than myself,
Heres what im considering all from Aux Battery
6B&S Run + & - from Battery through firewall to a 6,8 or 10 space Fuse bank with a 40A inline fuse next to Battery, Fuse bank mounted either under dash or preferably to rear drawer wing space.
Compressor
ARB CKMA12 from fuse bank 6B&S run + & - to compressor using 40A inline fuse, also mounted in rear wing.
Fridge
Engel, Do I just run it seperately to the fuse bank using a inline fuse, if so what size considering the fridge runs about 1.2A to 2.4 A, understanding they have a thermal fuse I just cant find in my searching a fuse size or more importantly a best option to take when wiring up a fridge. Im also considering a switch to turn on and off, but just as easy to pull it out during the week whilst at work, and plug it in when I do me trips
All this said and done Ive also heard that some people run an earth from the chassis as there have been issues in the past due to Battery earth being connected to the body only, as stated above im looking at running a Negative from the Battery to the fuse bank in the back, would this be enough or have some of you taken the Chassis approach also.
I hope I havent put too much into a single post but it is all relative and im hoping to find a best option and have a go at it myself.
Appreciate any input you may have,
Cheers